亲宝软件园·资讯

展开

centos中lvs安装配置方法详解

人气:0

一、lvs-nat模式

网络配置:


lvs-server eth0 :host-only adapter 192.168.56.101
lvs-server eth1 :Internal 192.168.0.1
real-server-1 eth0:Internal 192.168.0.2
real-server-2 eth0:Internal 192.168.0.3

 
lvs-server:
1、安装ipvsadm软件


yum -y install ipvsadm*
echo 1 > /proc/sys/net/ipv4/ip_forward 路由器功能,ip转发
ipvsadm -C
ipvsadm -At 192.168.56.101:80 -s rr 轮叫模式
ipvsadm -at 192.168.56.101:80 -r 192.168.0.2 -m
ipvsadm -at 192.168.56.101:80 -r 192.168.0.3 -m
ipvsadm -L -n

2、real-server-1:


ifconfig eth0 192.168.0.2 netmask 255.255.255.0
route add default gw 192.168.0.1

3、real-server-2


ifconfig eth0 192.168.0.3 netmask 255.255.255.0
route add default gw 192.168.0.1
route -n 查看路由表

 
二、lvs-ipturn

网络配置:


lvs-server eth0:host-only adapter 192.168.56.101
real-server-1 eth0:host-only adapter 192.168.56.102
real-server-2 eth0:host-only adapter 192.168.56.103

lvs-server:
配置虚拟ip即vip


ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0</p> <p>ivsadm -C
ipvsadm -At 192.168.56.10:80 -s rr
ipvsadm -at 192.168.56.10:80 -r 192.168.56.102 -i
ipvsadm -at 192.168.56.10:80 -r 192.168.56.103 -i
ipvsadm -L -n

real-server-1:


ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0
echo 1 > /proc/sys/net/ipv4/conf/tunl0/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/tunl0/arp_announce
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce

real-server-2:


ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0
echo 1 > /proc/sys/net/ipv4/conf/tunl0/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/tunl0/arp_announce
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce

 
三、lvs-dr

网络配置:


lvs-server eth0:host-only adapter 192.168.56.101</p> <p>real-server-1 eth0:host-only adapter 192.168.56.102</p> <p>real-server-2 eth0:host-only adapter 192.168.56.103</p> <p>lvs-server:</p> <p>ifconfig eth0:0 192.168.56.10 netmask 255.255.255.255</p> <p>route add -host 192.168.56.10 dev eth0:0

ipvs:


ipvsadm -C ipvsadm -At 192.168.56.10:80 -s rr ipvsadm -at 192.168.56.10:80 -r 192.168.56.102 -g ipvsadm -at 192.168.56.10:80 -r 192.168.56.103 -g ipvsadm -L -n</p> <p>real-server-1: ifconfig lo:0 192.168.56.10 netmask 255.255.255.255 route add -host 192.168.56.10 dev lo:0 echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce</p> <p>real-server-2: ifconfig lo:0 192.168.56.10 netmask 255.255.255.255 route add -host 192.168.56.10 dev lo:0 echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce

加载全部内容

相关教程
猜你喜欢
用户评论