亲宝软件园·资讯

展开

Linux磁盘管理之LVM

qiuhom 人气:0

  一、LVM介绍

  在我们管理Linux磁盘的时候,通常会遇到这么一种情况。在最初规划Linux的磁盘的时候,我们给某个分区划分了一定量的磁盘空间,使用一段时间后,发现我们规划的磁盘空间不足了,这个时候怎么办?我们肯定要想办法给扩容呀,找一块磁盘分区,格式化,然后挂载,然后把数据拷贝到新加的磁盘上,然后把原有的磁盘卸载掉,通常我们是这样做的。这样一来虽然达到了扩容的目的,但是费时费力;如果第二次扩容,空间还是不够,我们又要重复上面的步骤;如果分配的磁盘空间过大,使用了很久才发现它根本用不到那么多空间,这个时候是不是又要调整呀,听着就感觉很繁琐。这时候你肯定要想有没有那种可挂载上一块盘,我们利用某种管理手段,可以在线的调整磁盘的空间,这样有节约了时间,也可实现弹性管理磁盘。对,lvm就有这样的功能。

  LVM(logical volume manager)逻辑卷管理,它可以弹性的管理文件系统的容量,LVM的工作原理是将一个或多个底层块设备组织成一个逻辑设备,这个逻辑设备可以在未来新增或移除其他的分区到这个逻辑设备中,从而实现了弹性管理磁盘。

  PV:物理卷(physical volume);物理卷就是指硬盘分区或从逻辑上与磁盘分区具有同样功能的设备(如raid),是LVM的基本储存逻辑块,但和基本的物理存储介质(如分区,磁盘等)比较,却包含有与LVM相关的管理参数

  VG:卷组(volume group)LVM卷组类似于非LVM系统中的物理硬盘,尤其物理卷组成,可以在卷组上创建一个或多个LVM分区(逻辑卷),LVM卷组由一个或多个物理卷组成

  LV:逻辑卷(logical volume)LVM的逻辑卷类似非LVM系统中的硬盘分区,在逻辑卷之上可以创建文件系统。

  LVM就是将一些零碎的磁盘分区(PV)合并成一个较大的磁盘(VG),然后在根据需要对这个较大的磁盘(VG)进行划分成不同的大小分区(LV),这些小的分区(LV)是可以动态的扩展和缩小的,这就是LVM的逻辑卷管理过程。所谓LVM的大磁盘就是将许多PV整合成的VG,那么这个大磁盘最大可达到多少容量呢?我们知道在文件系统里面数据存储的最小单位是块(block),不过在LVM当中数据储存的最小单位是PE,PE的的作用同block的作用一样,需要注意到是LVM默认使用的PE大小是4M,而LVM的VG最多能包含65534个PE,也就是说默认LVM的VG会有4×65534M/1024M=256G,所以PE的大小决定了VG的最大容量,当然我们在创建VG的时候可指定PE大小,从而来决定VG的大小。

  二、LVM实现

  1)前期准备几块硬盘或者分区来模拟PV

[root@test-centos7-node1 ~]# lsblk
NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda      8:0    0   50G  0 disk 
├─sda1   8:1    0    2G  0 part /boot
├─sda2   8:2    0    2G  0 part [SWAP]
└─sda3   8:3    0   46G  0 part /
sdb      8:16   0   50G  0 disk 
sr0     11:0    1  792M  0 rom  
[root@test-centos7-node1 ~]# fdisk https://img.qb5200.com/download-x/dev/sdb
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x6180123f.

Command (m for help): p

Disk https://img.qb5200.com/download-x/dev/sdb: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x6180123f

   Device Boot      Start         End      Blocks   Id  System

Command (m for help): n
Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p): p
Partition number (1-4, default 1): 
First sector (2048-104857599, default 2048): 
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-104857599, default 104857599): +10G
Partition 1 of type Linux and of size 10 GiB is set

Command (m for help): p

Disk https://img.qb5200.com/download-x/dev/sdb: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x6180123f

   Device Boot      Start         End      Blocks   Id  System
https://img.qb5200.com/download-x/dev/sdb1            2048    20973567    10485760   83  Linux

Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): 8e
Changed type of partition 'Linux' to 'Linux LVM'

Command (m for help): n
Partition type:
   p   primary (1 primary, 0 extended, 3 free)
   e   extended
Select (default p): p
Partition number (2-4, default 2): 
First sector (20973568-104857599, default 20973568): 
Using default value 20973568
Last sector, +sectors or +size{K,M,G} (20973568-104857599, default 104857599): +10G
Partition 2 of type Linux and of size 10 GiB is set

Command (m for help): t
Partition number (1,2, default 2): 
Hex code (type L to list all codes): 8e
Changed type of partition 'Linux' to 'Linux LVM'

Command (m for help): n
Partition type:
   p   primary (2 primary, 0 extended, 2 free)
   e   extended
Select (default p): p
Partition number (3,4, default 3): 
First sector (41945088-104857599, default 41945088): 
Using default value 41945088
Last sector, +sectors or +size{K,M,G} (41945088-104857599, default 104857599): +10G
Partition 3 of type Linux and of size 10 GiB is set

Command (m for help): t
Partition number (1-3, default 3): 
Hex code (type L to list all codes): 8e 
Changed type of partition 'Linux' to 'Linux LVM'

Command (m for help): p

Disk https://img.qb5200.com/download-x/dev/sdb: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x6180123f

   Device Boot      Start         End      Blocks   Id  System
https://img.qb5200.com/download-x/dev/sdb1            2048    20973567    10485760   8e  Linux LVM
https://img.qb5200.com/download-x/dev/sdb2        20973568    41945087    10485760   8e  Linux LVM
https://img.qb5200.com/download-x/dev/sdb3        41945088    62916607    10485760   8e  Linux LVM

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
[root@test-centos7-node1 ~]# lsblk
NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda      8:0    0   50G  0 disk 
├─sda1   8:1    0    2G  0 part /boot
├─sda2   8:2    0    2G  0 part [SWAP]
└─sda3   8:3    0   46G  0 part /
sdb      8:16   0   50G  0 disk 
├─sdb1   8:17   0   10G  0 part 
├─sdb2   8:18   0   10G  0 part 
└─sdb3   8:19   0   10G  0 part 
sr0     11:0    1  792M  0 rom  
[root@test-centos7-node1 ~]# 

  说明:这里是用的分区来模拟硬盘当作PV,这里需要注意一点,就是我们分区完保存后,可能存在不同不到问题,就是我们分区完用lsblk看不到分区,可用 partprobe来同步分区信息。centos6 使用partx  -a https://img.qb5200.com/download-x/dev/sdb来增加分区同步到内存,如果是删除某个分区,就需要执行partx -d -nr # https://img.qb5200.com/download-x/dev/sdb  此命令表示从https://img.qb5200.com/download-x/dev/sdb的分区信息中删除sdb#分区信息,并同步到内存中。这里还需要注意一点的是我们分区的类型要选8e 表示Linux LVM

  2)装lvm2这个包

[root@test-centos7-node1 ~]# lvs
-bash: lvs: command not found
[root@test-centos7-node1 ~]# yum info  lvm2  
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirrors.aliyun.com
 * extras: mirrors.aliyun.com
 * updates: mirrors.aliyun.com
Available Packages
Name        : lvm2
Arch        : x86_64
Epoch       : 7
Version     : 2.02.185
Release     : 2.el7_7.2
Size        : 1.3 M
Repo        : updates/7/x86_64
Summary     : Userland logical volume management tools
URL         : http://sources.redhat.com/lvm2
License     : GPLv2
Description : LVM2 includes all of the support for handling read/write operations on
            : physical volumes (hard disks, RAID-Systems, magneto optical, etc.,
            : multiple devices (MD), see mdadm(8) or even loop devices, see
            : losetup(8)), creating volume groups (kind of virtual disks) from one
            : or more physical volumes and creating one or more logical volumes
            : (kind of logical partitions) in volume groups.

[root@test-centos7-node1 ~]# yum install lvm2 -y
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirrors.aliyun.com
 * extras: mirrors.aliyun.com
 * updates: mirrors.aliyun.com
Resolving Dependencies
--> Running transaction check
---> Package lvm2.x86_64 7:2.02.185-2.el7_7.2 will be installed
--> Processing Dependency: lvm2-libs = 7:2.02.185-2.el7_7.2 for package: 7:lvm2-2.02.185-2.el7_7.2.x86_64
--> Processing Dependency: device-mapper-persistent-data >= 0.7.0-0.1.rc6 for package: 7:lvm2-2.02.185-2.el7_7.2.x86_64
--> Processing Dependency: liblvm2app.so.2.2(Base)(64bit) for package: 7:lvm2-2.02.185-2.el7_7.2.x86_64
--> Processing Dependency: libdevmapper.so.1.02(DM_1_02_141)(64bit) for package: 7:lvm2-2.02.185-2.el7_7.2.x86_64
--> Processing Dependency: libdevmapper-event.so.1.02(Base)(64bit) for package: 7:lvm2-2.02.185-2.el7_7.2.x86_64
--> Processing Dependency: liblvm2app.so.2.2()(64bit) for package: 7:lvm2-2.02.185-2.el7_7.2.x86_64
--> Processing Dependency: libdevmapper-event.so.1.02()(64bit) for package: 7:lvm2-2.02.185-2.el7_7.2.x86_64
--> Running transaction check
---> Package device-mapper-event-libs.x86_64 7:1.02.158-2.el7_7.2 will be installed
---> Package device-mapper-libs.x86_64 7:1.02.140-8.el7 will be updated
--> Processing Dependency: device-mapper-libs = 7:1.02.140-8.el7 for package: 7:device-mapper-1.02.140-8.el7.x86_64
---> Package device-mapper-libs.x86_64 7:1.02.158-2.el7_7.2 will be an update
---> Package device-mapper-persistent-data.x86_64 0:0.8.5-1.el7 will be installed
---> Package lvm2-libs.x86_64 7:2.02.185-2.el7_7.2 will be installed
--> Processing Dependency: device-mapper-event = 7:1.02.158-2.el7_7.2 for package: 7:lvm2-libs-2.02.185-2.el7_7.2.x86_64
--> Running transaction check
---> Package device-mapper.x86_64 7:1.02.140-8.el7 will be updated
---> Package device-mapper.x86_64 7:1.02.158-2.el7_7.2 will be an update
---> Package device-mapper-event.x86_64 7:1.02.158-2.el7_7.2 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

============================================================================================================================
 Package                                   Arch               Version                             Repository           Size
============================================================================================================================
Installing:
 lvm2                                      x86_64             7:2.02.185-2.el7_7.2                updates             1.3 M
Installing for dependencies:
 device-mapper-event                       x86_64             7:1.02.158-2.el7_7.2                updates             190 k
 device-mapper-event-libs                  x86_64             7:1.02.158-2.el7_7.2                updates             189 k
 device-mapper-persistent-data             x86_64             0.8.5-1.el7                         base                423 k
 lvm2-libs                                 x86_64             7:2.02.185-2.el7_7.2                updates             1.1 M
Updating for dependencies:
 device-mapper                             x86_64             7:1.02.158-2.el7_7.2                updates             294 k
 device-mapper-libs                        x86_64             7:1.02.158-2.el7_7.2                updates             322 k

Transaction Summary
============================================================================================================================
Install  1 Package  (+4 Dependent packages)
Upgrade             ( 2 Dependent packages)

Total download size: 3.8 M
Downloading packages:
Delta RPMs disabled because /usr/bin/applydeltarpm not installed.
(1/7): device-mapper-event-1.02.158-2.el7_7.2.x86_64.rpm                                             | 190 kB  00:00:00     
(2/7): device-mapper-event-libs-1.02.158-2.el7_7.2.x86_64.rpm                                        | 189 kB  00:00:00     
(3/7): device-mapper-libs-1.02.158-2.el7_7.2.x86_64.rpm                                              | 322 kB  00:00:00     
(4/7): lvm2-2.02.185-2.el7_7.2.x86_64.rpm                                                            | 1.3 MB  00:00:00     
(5/7): device-mapper-1.02.158-2.el7_7.2.x86_64.rpm                                                   | 294 kB  00:00:00     
(6/7): lvm2-libs-2.02.185-2.el7_7.2.x86_64.rpm                                                       | 1.1 MB  00:00:00     
(7/7): device-mapper-persistent-data-0.8.5-1.el7.x86_64.rpm                                          | 423 kB  00:00:00     
----------------------------------------------------------------------------------------------------------------------------
Total                                                                                       4.3 MB/s | 3.8 MB  00:00:00     
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
  Updating   : 7:device-mapper-1.02.158-2.el7_7.2.x86_64                                                                1/9 
  Updating   : 7:device-mapper-libs-1.02.158-2.el7_7.2.x86_64                                                           2/9 
  Installing : 7:device-mapper-event-libs-1.02.158-2.el7_7.2.x86_64                                                     3/9 
  Installing : 7:device-mapper-event-1.02.158-2.el7_7.2.x86_64                                                          4/9 
  Installing : 7:lvm2-libs-2.02.185-2.el7_7.2.x86_64                                                                    5/9 
  Installing : device-mapper-persistent-data-0.8.5-1.el7.x86_64                                                         6/9 
  Installing : 7:lvm2-2.02.185-2.el7_7.2.x86_64                                                                         7/9 
Created symlink from /etc/systemd/system/sysinit.target.wants/lvm2-lvmpolld.socket to /usr/lib/systemd/system/lvm2-lvmpolld.socket.
  Cleanup    : 7:device-mapper-1.02.140-8.el7.x86_64                                                                    8/9 
  Cleanup    : 7:device-mapper-libs-1.02.140-8.el7.x86_64                                                               9/9 
  Verifying  : 7:device-mapper-libs-1.02.158-2.el7_7.2.x86_64                                                           1/9 
  Verifying  : 7:device-mapper-1.02.158-2.el7_7.2.x86_64                                                                2/9 
  Verifying  : device-mapper-persistent-data-0.8.5-1.el7.x86_64                                                         3/9 
  Verifying  : 7:lvm2-2.02.185-2.el7_7.2.x86_64                                                                         4/9 
  Verifying  : 7:lvm2-libs-2.02.185-2.el7_7.2.x86_64                                                                    5/9 
  Verifying  : 7:device-mapper-event-1.02.158-2.el7_7.2.x86_64                                                          6/9 
  Verifying  : 7:device-mapper-event-libs-1.02.158-2.el7_7.2.x86_64                                                     7/9 
  Verifying  : 7:device-mapper-1.02.140-8.el7.x86_64                                                                    8/9 
  Verifying  : 7:device-mapper-libs-1.02.140-8.el7.x86_64                                                               9/9 

Installed:
  lvm2.x86_64 7:2.02.185-2.el7_7.2                                                                                          

Dependency Installed:
  device-mapper-event.x86_64 7:1.02.158-2.el7_7.2             device-mapper-event-libs.x86_64 7:1.02.158-2.el7_7.2         
  device-mapper-persistent-data.x86_64 0:0.8.5-1.el7          lvm2-libs.x86_64 7:2.02.185-2.el7_7.2                        

Dependency Updated:
  device-mapper.x86_64 7:1.02.158-2.el7_7.2                  device-mapper-libs.x86_64 7:1.02.158-2.el7_7.2                 

Complete!
[root@test-centos7-node1 ~]# 

  说明:最小化安装系统默认系统上没有安装这个包的,所以我们需要把这个包装上才可创建LVM

  3)创建PV

[root@test-centos7-node1 ~]# pvcreate https://img.qb5200.com/download-x/dev/sdb{1,2,3}
  Physical volume "https://img.qb5200.com/download-x/dev/sdb1" successfully created.
  Physical volume "https://img.qb5200.com/download-x/dev/sdb2" successfully created.
  Physical volume "https://img.qb5200.com/download-x/dev/sdb3" successfully created.
[root@test-centos7-node1 ~]# pvscan 
  PV https://img.qb5200.com/download-x/dev/sdb1                      lvm2 [10.00 GiB]
  PV https://img.qb5200.com/download-x/dev/sdb3                      lvm2 [10.00 GiB]
  PV https://img.qb5200.com/download-x/dev/sdb2                      lvm2 [10.00 GiB]
  Total: 3 [30.00 GiB] / in use: 0 [0   ] / in no VG: 3 [30.00 GiB]
[root@test-centos7-node1 ~]# pvs
  PV         VG Fmt  Attr PSize  PFree 
  https://img.qb5200.com/download-x/dev/sdb1     lvm2 ---  10.00g 10.00g
  https://img.qb5200.com/download-x/dev/sdb2     lvm2 ---  10.00g 10.00g
  https://img.qb5200.com/download-x/dev/sdb3     lvm2 ---  10.00g 10.00g
[root@test-centos7-node1 ~]# pvdisplay 
  "https://img.qb5200.com/download-x/dev/sdb1" is a new physical volume of "10.00 GiB"
  --- NEW Physical volume ---
  PV Name               https://img.qb5200.com/download-x/dev/sdb1
  VG Name               
  PV Size               10.00 GiB
  Allocatable           NO
  PE Size               0   
  Total PE              0
  Free PE               0
  Allocated PE          0
  PV UUID               MsszES-YPdm-YGQl-7rgg-B6gX-Q4xu-T8m1gz
   
  "https://img.qb5200.com/download-x/dev/sdb3" is a new physical volume of "10.00 GiB"
  --- NEW Physical volume ---
  PV Name               https://img.qb5200.com/download-x/dev/sdb3
  VG Name               
  PV Size               10.00 GiB
  Allocatable           NO
  PE Size               0   
  Total PE              0
  Free PE               0
  Allocated PE          0
  PV UUID               BMMx8p-zu9O-ns61-G9DU-iKMR-NmZO-crCjlR
   
  "https://img.qb5200.com/download-x/dev/sdb2" is a new physical volume of "10.00 GiB"
  --- NEW Physical volume ---
  PV Name               https://img.qb5200.com/download-x/dev/sdb2
  VG Name               
  PV Size               10.00 GiB
  Allocatable           NO
  PE Size               0   
  Total PE              0
  Free PE               0
  Allocated PE          0
  PV UUID               LPynpW-twlu-fxwg-OlCT-jA2A-R5UI-fvqWLj
   
[root@test-centos7-node1 ~]# 

  说明:pvcreate 命令表示创建PV 后面跟硬盘或分区对应的设备文件,pvscan 命令作用是搜索系统里面任何具有PV属性的磁碟,PV属性就是通过pvcreate创建过的磁碟,pvs是查看pv简要情况,pvdisplay 查看pv的详细信息。当然我们要移除某块盘,让其不具备PV属性,可以用pvremove + 磁盘的设备文件路径

[root@test-centos7-node1 ~]# pvremove https://img.qb5200.com/download-x/dev/sdb3
  Labels on physical volume "https://img.qb5200.com/download-x/dev/sdb3" successfully wiped.
[root@test-centos7-node1 ~]# pvs
  PV         VG Fmt  Attr PSize  PFree 
  https://img.qb5200.com/download-x/dev/sdb1     lvm2 ---  10.00g 10.00g
  https://img.qb5200.com/download-x/dev/sdb2     lvm2 ---  10.00g 10.00g
[root@test-centos7-node1 ~]# 

  说明:移除pv的前提是它没有在任何VG里面才可做移除,否则移除不了

  4)创建VG

[root@test-centos7-node1 ~]# pvs
  PV         VG Fmt  Attr PSize  PFree 
  https://img.qb5200.com/download-x/dev/sdb1     lvm2 ---  10.00g 10.00g
  https://img.qb5200.com/download-x/dev/sdb2     lvm2 ---  10.00g 10.00g
[root@test-centos7-node1 ~]# pvcreate https://img.qb5200.com/download-x/dev/sdb3
  Physical volume "https://img.qb5200.com/download-x/dev/sdb3" successfully created.
[root@test-centos7-node1 ~]# pvs
  PV         VG Fmt  Attr PSize  PFree 
  https://img.qb5200.com/download-x/dev/sdb1     lvm2 ---  10.00g 10.00g
  https://img.qb5200.com/download-x/dev/sdb2     lvm2 ---  10.00g 10.00g
  https://img.qb5200.com/download-x/dev/sdb3     lvm2 ---  10.00g 10.00g
[root@test-centos7-node1 ~]# vgcreate test -s 8M https://img.qb5200.com/download-x/dev/sdb{1,2,3}
  Volume group "test" successfully created
[root@test-centos7-node1 ~]# vgs
  VG   #PV #LV #SN Attr   VSize   VFree  
  test   3   0   0 wz--n- <29.98g <29.98g
[root@test-centos7-node1 ~]# vgscan
  Reading volume groups from cache.
  Found volume group "test" using metadata type lvm2
[root@test-centos7-node1 ~]# vgdisplay 
  --- Volume group ---
  VG Name               test
  System ID             
  Format                lvm2
  Metadata Areas        3
  Metadata Sequence No  1
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                0
  Open LV               0
  Max PV                0
  Cur PV                3
  Act PV                3
  VG Size               <29.98 GiB
  PE Size               8.00 MiB
  Total PE              3837
  Alloc PE / Size       0 / 0   
  Free  PE / Size       3837 / <29.98 GiB
  VG UUID               31vxAP-L5jb-8Yxm-25m2-LdD0-ee8R-sdTjum
   
[root@test-centos7-node1 ~]# vgreduce test https://img.qb5200.com/download-x/dev/sdb3
  Removed "https://img.qb5200.com/download-x/dev/sdb3" from volume group "test"
[root@test-centos7-node1 ~]# vgs
  VG   #PV #LV #SN Attr   VSize  VFree 
  test   2   0   0 wz--n- 19.98g 19.98g
[root@test-centos7-node1 ~]# vgcreate test2 https://img.qb5200.com/download-x/dev/sdb3
  Volume group "test2" successfully created
[root@test-centos7-node1 ~]# vgs
  VG    #PV #LV #SN Attr   VSize   VFree  
  test    2   0   0 wz--n-  19.98g  19.98g
  test2   1   0   0 wz--n- <10.00g <10.00g
[root@test-centos7-node1 ~]# vgdisplay test2
  --- Volume group ---
  VG Name               test2
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  1
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                0
  Open LV               0
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               <10.00 GiB
  PE Size               4.00 MiB
  Total PE              2559
  Alloc PE / Size       0 / 0   
  Free  PE / Size       2559 / <10.00 GiB
  VG UUID               rc94SP-JAlk-63Rw-n5xz-qB0d-grnT-ItrMvT
   
[root@test-centos7-node1 ~]# vgremove test2
  Volume group "test2" successfully removed
[root@test-centos7-node1 ~]# vgs
  VG   #PV #LV #SN Attr   VSize  VFree 
  test   2   0   0 wz--n- 19.98g 19.98g
[root@test-centos7-node1 ~]# 

  说明:同样的vgcreate 表示创建VG 其用法格式是vgcreate  VGNAME [option] 储存设备路径 其中-s表示指定PE的大小,VGNAME表示VG的名称,需要说明的是,指定名称不能和系统现有的VG名称相同;vgs查看系统上所有VG的简要信息,vgscan搜寻系统上面是否有VG,vgdisplay查看所有VG的详细信息,当然此例中只有一个,我们也可在后面指定查看某个VG的详细信息,只需要指定其VG名称即可;有关vg的命令有很多其中vgreduce的作用是在VG内移除PV,vgremove的作用是删除一个VG,这两个命令都需要在其后指定要操作的VG名称

  5)创建LV

[root@test-centos7-node1 ~]# lvs
[root@test-centos7-node1 ~]# lvcreate -L 2G -n aaa test
  Logical volume "aaa" created.
[root@test-centos7-node1 ~]# lvcreate -L 3G -n bbb test 
  Logical volume "bbb" created.
[root@test-centos7-node1 ~]# lvs
  LV   VG   Attr       LSize Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  aaa  test -wi-a----- 2.00g                                                    
  bbb  test -wi-a----- 3.00g                                                    
[root@test-centos7-node1 ~]# lvscan 
  ACTIVE            'https://img.qb5200.com/download-x/dev/test/aaa' [2.00 GiB] inherit
  ACTIVE            'https://img.qb5200.com/download-x/dev/test/bbb' [3.00 GiB] inherit
[root@test-centos7-node1 ~]# lvdisplay 
  --- Logical volume ---
  LV Path                https://img.qb5200.com/download-x/dev/test/aaa
  LV Name                aaa
  VG Name                test
  LV UUID                R9weh0-D85B-rMcW-oYSM-dAQb-gIQh-RXxITP
  LV Write Access        read/write
  LV Creation host, time test-centos7-node1, 2020-01-06 09:05:23 -0500
  LV Status              available
  # open                 0
  LV Size                2.00 GiB
  Current LE             256
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     8192
  Block device           253:0
   
  --- Logical volume ---
  LV Path                https://img.qb5200.com/download-x/dev/test/bbb
  LV Name                bbb
  VG Name                test
  LV UUID                LYwvZj-ogpf-nwtF-mja6-xwwl-A24W-BslJOu
  LV Write Access        read/write
  LV Creation host, time test-centos7-node1, 2020-01-06 09:05:34 -0500
  LV Status              available
  # open                 0
  LV Size                3.00 GiB
  Current LE             384
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     8192
  Block device           253:1
   
[root@test-centos7-node1 ~]# lvresize -L +4G https://img.qb5200.com/download-x/dev/test/aaa 
  Size of logical volume test/aaa changed from 2.00 GiB (256 extents) to 6.00 GiB (768 extents).
  Logical volume test/aaa successfully resized.
[root@test-centos7-node1 ~]# lvs
  LV   VG   Attr       LSize Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  aaa  test -wi-a----- 6.00g                                                    
  bbb  test -wi-a----- 3.00g                                                    
[root@test-centos7-node1 ~]# lvresize -L -1G https://img.qb5200.com/download-x/dev/test/bbb
  WARNING: Reducing active logical volume to 2.00 GiB.
  THIS MAY DESTROY YOUR DATA (filesystem etc.)
Do you really want to reduce test/bbb? [y/n]: y
  Size of logical volume test/bbb changed from 3.00 GiB (384 extents) to 2.00 GiB (256 extents).
  Logical volume test/bbb successfully resized.
[root@test-centos7-node1 ~]# lvs
  LV   VG   Attr       LSize Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  aaa  test -wi-a----- 6.00g                                                    
  bbb  test -wi-a----- 2.00g                                                    
[root@test-centos7-node1 ~]# lvreduce -L 3G https://img.qb5200.com/download-x/dev/test/aaa   
  WARNING: Reducing active logical volume to 3.00 GiB.
  THIS MAY DESTROY YOUR DATA (filesystem etc.)
Do you really want to reduce test/aaa? [y/n]: y
  Size of logical volume test/aaa changed from 6.00 GiB (768 extents) to 3.00 GiB (384 extents).
  Logical volume test/aaa successfully resized.
[root@test-centos7-node1 ~]# lvs
  LV   VG   Attr       LSize Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  aaa  test -wi-a----- 3.00g                                                    
  bbb  test -wi-a----- 2.00g                                                    
[root@test-centos7-node1 ~]# lvreduce -L -1G https://img.qb5200.com/download-x/dev/test/aaa  
  WARNING: Reducing active logical volume to 2.00 GiB.
  THIS MAY DESTROY YOUR DATA (filesystem etc.)
Do you really want to reduce test/aaa? [y/n]: y
  Size of logical volume test/aaa changed from 3.00 GiB (384 extents) to 2.00 GiB (256 extents).
  Logical volume test/aaa successfully resized.
[root@test-centos7-node1 ~]# lvs
  LV   VG   Attr       LSize Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  aaa  test -wi-a----- 2.00g                                                    
  bbb  test -wi-a----- 2.00g                                                    
[root@test-centos7-node1 ~]# lvremove https://img.qb5200.com/download-x/dev/test/bbb
Do you really want to remove active logical volume test/bbb? [y/n]: y
  Logical volume "bbb" successfully removed
[root@test-centos7-node1 ~]# lvs
  LV   VG   Attr       LSize Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  aaa  test -wi-a----- 2.00g                                                    
[root@test-centos7-node1 ~]# 

  说明:lvcreate 命令作用是创建LV 其中-L表示指定LV的大小,-n表示lv的名称 最后跟VG的名称,表示从那个VG上创建LV;lvs 命令作用是查看系统所有的lv简要信息 ;lvdisplay 查看LV的详细信息,后面可以跟VG的名称表示查看指定VG上的所有LV的详细信息;lvreduce 命令作用是缩减指定LV里的空间,如果指定的大小是负数如-3M 表示缩减3M  如果指定的是 3M 则表示缩减至3M ,这个需要注意,还有这个命令指定大小不能以类似+4M来指定;lvresize此命令的作用是调整LV的容量大小,这个命令指定调整大小+表示增加多少,-表示减少多少,若没有+/-表示调整到指定大小,lvresize和lvreduce这两个命令后面都是跟的lv对应设备的路径(其实不是真的设备路径,是设备的软连接路径),不能指定其名称;lvremove命令作用是删除指定的LV,若指定的是vg名,表示删除该VG上的所有LV,若需要删除某个LV 需要指定其对应设备路径。

  到此lvm就已经实现,后续就可以直接格式化,然后挂载使用了

[root@test-centos7-node1 ~]# vgs
  VG   #PV #LV #SN Attr   VSize  VFree 
  test   2   0   0 wz--n- 19.98g 19.98g
[root@test-centos7-node1 ~]# lvcreate -l 100%FREE -n xxx test
WARNING: xfs signature detected on https://img.qb5200.com/download-x/dev/test/xxx at offset 0. Wipe it? [y/n]: y
  Wiping xfs signature on https://img.qb5200.com/download-x/dev/test/xxx.
  Logical volume "xxx" created.
[root@test-centos7-node1 ~]# lvs
  LV   VG   Attr       LSize  Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  xxx  test -wi-a----- 19.98g                                                    
[root@test-centos7-node1 ~]# mkfs.xfs -f https://img.qb5200.com/download-x/dev/test/xxx 
meta-data=https://img.qb5200.com/download-x/dev/test/xxx          isize=512    agcount=4, agsize=1309696 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=1        finobt=0, sparse=0
data     =                       bsize=4096   blocks=5238784, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
log      =internal log           bsize=4096   blocks=2560, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
[root@test-centos7-node1 ~]# lsblk
NAME         MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda            8:0    0   50G  0 disk 
├─sda1         8:1    0    2G  0 part /boot
├─sda2         8:2    0    2G  0 part [SWAP]
└─sda3         8:3    0   46G  0 part /
sdb            8:16   0   50G  0 disk 
├─sdb1         8:17   0   10G  0 part 
│ └─test-xxx 253:0    0   20G  0 lvm  
├─sdb2         8:18   0   10G  0 part 
│ └─test-xxx 253:0    0   20G  0 lvm  
└─sdb3         8:19   0   10G  0 part 
sr0           11:0    1  792M  0 rom  
[root@test-centos7-node1 ~]# mount https://img.qb5200.com/download-x/dev/test/xxx /mnt
[root@test-centos7-node1 ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
https://img.qb5200.com/download-x/dev/sda3              46G  1.6G   45G   4% /
devtmpfs              1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev
tmpfs                 1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev/shm
tmpfs                 1.9G  8.6M  1.9G   1% /run
tmpfs                 1.9G     0  1.9G   0% /sys/fs/cgroup
https://img.qb5200.com/download-x/dev/sda1             2.0G  135M  1.9G   7% /boot
tmpfs                 378M     0  378M   0% /run/user/0
https://img.qb5200.com/download-x/dev/mapper/test-xxx   20G   33M   20G   1% /mnt
[root@test-centos7-node1 ~]# 

  三、扩容LV

  1)创建PV,并将其加入到VG中

[root@test-centos7-node1 ~]# pvs
  PV         VG   Fmt  Attr PSize PFree
  https://img.qb5200.com/download-x/dev/sdb1  test lvm2 a--  9.99g    0 
  https://img.qb5200.com/download-x/dev/sdb2  test lvm2 a--  9.99g    0 
[root@test-centos7-node1 ~]# vgdisplay 
  --- Volume group ---
  VG Name               test
  System ID             
  Format                lvm2
  Metadata Areas        2
  Metadata Sequence No  28
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                1
  Open LV               1
  Max PV                0
  Cur PV                2
  Act PV                2
  VG Size               19.98 GiB
  PE Size               8.00 MiB
  Total PE              2558
  Alloc PE / Size       2558 / 19.98 GiB
  Free  PE / Size       0 / 0   
  VG UUID               31vxAP-L5jb-8Yxm-25m2-LdD0-ee8R-sdTjum
   
[root@test-centos7-node1 ~]# 

  说明:从上面的信息可以看到VG的大小是19.98G 也就是两块PV的大小。现在我们新创建一个pv,然后加到vg里

[root@test-centos7-node1 ~]# pvs
  PV         VG   Fmt  Attr PSize PFree
  https://img.qb5200.com/download-x/dev/sdb1  test lvm2 a--  9.99g    0 
  https://img.qb5200.com/download-x/dev/sdb2  test lvm2 a--  9.99g    0 
[root@test-centos7-node1 ~]# pvcreate  https://img.qb5200.com/download-x/dev/sdb3
  Physical volume "https://img.qb5200.com/download-x/dev/sdb3" successfully created.
[root@test-centos7-node1 ~]# pvs
  PV         VG   Fmt  Attr PSize  PFree 
  https://img.qb5200.com/download-x/dev/sdb1  test lvm2 a--   9.99g     0 
  https://img.qb5200.com/download-x/dev/sdb2  test lvm2 a--   9.99g     0 
  https://img.qb5200.com/download-x/dev/sdb3       lvm2 ---  10.00g 10.00g
[root@test-centos7-node1 ~]# vgs
  VG   #PV #LV #SN Attr   VSize  VFree
  test   2   1   0 wz--n- 19.98g    0 
[root@test-centos7-node1 ~]# vgextend test https://img.qb5200.com/download-x/dev/sdb3
  Volume group "test" successfully extended
[root@test-centos7-node1 ~]# vgs
  VG   #PV #LV #SN Attr   VSize   VFree
  test   3   1   0 wz--n- <29.98g 9.99g
[root@test-centos7-node1 ~]# vgdisplay 
  --- Volume group ---
  VG Name               test
  System ID             
  Format                lvm2
  Metadata Areas        3
  Metadata Sequence No  31
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                1
  Open LV               1
  Max PV                0
  Cur PV                3
  Act PV                3
  VG Size               <29.98 GiB
  PE Size               8.00 MiB
  Total PE              3837
  Alloc PE / Size       2558 / 19.98 GiB
  Free  PE / Size       1279 / 9.99 GiB
  VG UUID               31vxAP-L5jb-8Yxm-25m2-LdD0-ee8R-sdTjum
   
[root@test-centos7-node1 ~]# 

  说明:vgextend命令作用是将指定pv加入到指定VG中,VG指定其名称即可,pv需指定其设备路径

  2)将新加的VG的PE加入到xxx LV里

[root@test-centos7-node1 ~]# vgs
  VG   #PV #LV #SN Attr   VSize   VFree
  test   3   1   0 wz--n- <29.98g 9.99g
[root@test-centos7-node1 ~]# lvs
  LV   VG   Attr       LSize  Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  xxx  test -wi-ao---- 19.98g                                                    
[root@test-centos7-node1 ~]# lvdisplay 
  --- Logical volume ---
  LV Path                https://img.qb5200.com/download-x/dev/test/xxx
  LV Name                xxx
  VG Name                test
  LV UUID                ihOo41-gh1L-eSHK-iLXY-UGfF-J6uI-UmVWhF
  LV Write Access        read/write
  LV Creation host, time test-centos7-node1, 2020-01-06 10:00:08 -0500
  LV Status              available
  # open                 1
  LV Size                19.98 GiB
  Current LE             2558
  Segments               2
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     8192
  Block device           253:0
   
[root@test-centos7-node1 ~]# lvextend -l +100%FREE https://img.qb5200.com/download-x/dev/test/xxx 
  Size of logical volume test/xxx changed from 19.98 GiB (2558 extents) to <29.98 GiB (3837 extents).
  Logical volume test/xxx successfully resized.
[root@test-centos7-node1 ~]# lvs
  LV   VG   Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  xxx  test -wi-ao---- <29.98g                                                    
[root@test-centos7-node1 ~]# lvdisplay 
  --- Logical volume ---
  LV Path                https://img.qb5200.com/download-x/dev/test/xxx
  LV Name                xxx
  VG Name                test
  LV UUID                ihOo41-gh1L-eSHK-iLXY-UGfF-J6uI-UmVWhF
  LV Write Access        read/write
  LV Creation host, time test-centos7-node1, 2020-01-06 10:00:08 -0500
  LV Status              available
  # open                 1
  LV Size                <29.98 GiB
  Current LE             3837
  Segments               3
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     8192
  Block device           253:0
   
[root@test-centos7-node1 ~]# vgs
  VG   #PV #LV #SN Attr   VSize   VFree
  test   3   1   0 wz--n- <29.98g    0 
[root@test-centos7-node1 ~]# lsblk
NAME         MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda            8:0    0   50G  0 disk 
├─sda1         8:1    0    2G  0 part /boot
├─sda2         8:2    0    2G  0 part [SWAP]
└─sda3         8:3    0   46G  0 part /
sdb            8:16   0   50G  0 disk 
├─sdb1         8:17   0   10G  0 part 
│ └─test-xxx 253:0    0   30G  0 lvm  /mnt
├─sdb2         8:18   0   10G  0 part 
│ └─test-xxx 253:0    0   30G  0 lvm  /mnt
└─sdb3         8:19   0   10G  0 part 
  └─test-xxx 253:0    0   30G  0 lvm  /mnt
sr0           11:0    1  792M  0 rom  
[root@test-centos7-node1 ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
https://img.qb5200.com/download-x/dev/sda3              46G  1.6G   45G   4% /
devtmpfs              1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev
tmpfs                 1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev/shm
tmpfs                 1.9G  8.6M  1.9G   1% /run
tmpfs                 1.9G     0  1.9G   0% /sys/fs/cgroup
https://img.qb5200.com/download-x/dev/sda1             2.0G  135M  1.9G   7% /boot
tmpfs                 378M     0  378M   0% /run/user/0
https://img.qb5200.com/download-x/dev/mapper/test-xxx   20G   33M   20G   1% /mnt
[root@test-centos7-node1 ~]# 

  说明:可看到lvs里的空间已经加上去,lvextend命令作用是将指定VG里的空间添加到指定的lv中,上面的例子是把VG里的所有空闲空间添加到https://img.qb5200.com/download-x/dev/test/xxx里,当然还有一种情况在VG还有空余的空间,我们可以用lvresize 来调整lv的大小;从上面的信息可以看到我们把新的空间加入到VG和Lv中后,df 看挂载点空间却没有增加,接下来我们通过resize2fs将文件系统同步到增大的空间。

[root@test-centos7-node1 ~]# resize2fs https://img.qb5200.com/download-x/dev/test/xxx 
resize2fs 1.42.9 (28-Dec-2013)
resize2fs: Bad magic number in super-block while trying to open https://img.qb5200.com/download-x/dev/test/xxx
Couldn't find valid filesystem superblock.
[root@test-centos7-node1 ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
https://img.qb5200.com/download-x/dev/sda3              46G  1.6G   45G   4% /
devtmpfs              1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev
tmpfs                 1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev/shm
tmpfs                 1.9G  8.6M  1.9G   1% /run
tmpfs                 1.9G     0  1.9G   0% /sys/fs/cgroup
https://img.qb5200.com/download-x/dev/sda1             2.0G  135M  1.9G   7% /boot
tmpfs                 378M     0  378M   0% /run/user/0
https://img.qb5200.com/download-x/dev/mapper/test-xxx   20G   33M   20G   1% /mnt
[root@test-centos7-node1 ~]# 

  说明:看来用此命令不行,因为resize2fs这个命令针对ext系列的文件系统,xfs需要用 xfs_growfs来调整

[root@test-centos7-node1 ~]# xfs_growfs https://img.qb5200.com/download-x/dev/test/xxx 
meta-data=https://img.qb5200.com/download-x/dev/mapper/test-xxx   isize=512    agcount=4, agsize=1309696 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=1        finobt=0 spinodes=0
data     =                       bsize=4096   blocks=5238784, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
log      =internal               bsize=4096   blocks=2560, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
data blocks changed from 5238784 to 7858176
[root@test-centos7-node1 ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
https://img.qb5200.com/download-x/dev/sda3              46G  1.6G   45G   4% /
devtmpfs              1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev
tmpfs                 1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev/shm
tmpfs                 1.9G  8.6M  1.9G   1% /run
tmpfs                 1.9G     0  1.9G   0% /sys/fs/cgroup
https://img.qb5200.com/download-x/dev/sda1             2.0G  135M  1.9G   7% /boot
tmpfs                 378M     0  378M   0% /run/user/0
https://img.qb5200.com/download-x/dev/mapper/test-xxx   30G   33M   30G   1% /mnt
[root@test-centos7-node1 ~]# 

  四、缩减LV(xfs文件系统)

  1)卸载已经挂好的LV

[root@test-centos7-node1 ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
https://img.qb5200.com/download-x/dev/sda3              46G  1.6G   45G   4% /
devtmpfs              1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev
tmpfs                 1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev/shm
tmpfs                 1.9G  8.6M  1.9G   1% /run
tmpfs                 1.9G     0  1.9G   0% /sys/fs/cgroup
https://img.qb5200.com/download-x/dev/sda1             2.0G  135M  1.9G   7% /boot
tmpfs                 378M     0  378M   0% /run/user/0
https://img.qb5200.com/download-x/dev/mapper/test-xxx   30G   33M   30G   1% /mnt
[root@test-centos7-node1 ~]# umount /mnt
[root@test-centos7-node1 ~]# df -h
Filesystem      Size  Used Avail Use% Mounted on
https://img.qb5200.com/download-x/dev/sda3        46G  1.6G   45G   4% /
devtmpfs        1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev
tmpfs           1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev/shm
tmpfs           1.9G  8.6M  1.9G   1% /run
tmpfs           1.9G     0  1.9G   0% /sys/fs/cgroup
https://img.qb5200.com/download-x/dev/sda1       2.0G  135M  1.9G   7% /boot
tmpfs           378M     0  378M   0% /run/user/0
[root@test-centos7-node1 ~]# 

  2)强制进行磁盘检测

[root@test-centos7-node1 ~]# xfs_repair -n https://img.qb5200.com/download-x/dev/test/xxx 
Phase 1 - find and verify superblock...
Phase 2 - using internal log
        - zero log...
        - scan filesystem freespace and inode maps...
        - found root inode chunk
Phase 3 - for each AG...
        - scan (but don't clear) agi unlinked lists...
        - process known inodes and perform inode discovery...
        - agno = 0
        - agno = 1
        - agno = 2
        - agno = 3
        - process newly discovered inodes...
Phase 4 - check for duplicate blocks...
        - setting up duplicate extent list...
        - check for inodes claiming duplicate blocks...
        - agno = 0
        - agno = 1
        - agno = 2
        - agno = 3
No modify flag set, skipping phase 5
Phase 6 - check inode connectivity...
        - traversing filesystem ...
        - traversal finished ...
        - moving disconnected inodes to lost+found ...
Phase 7 - verify link counts...
No modify flag set, skipping filesystem flush and exiting.
[root@test-centos7-node1 ~]# 

  说明:ext系列文件系统可e2fsck命令检查

  3)调整lv大小

[root@test-centos7-node1 ~]# lvreduce -L -10G https://img.qb5200.com/download-x/dev/test/xxx 
  WARNING: Reducing active logical volume to <19.98 GiB.
  THIS MAY DESTROY YOUR DATA (filesystem etc.)
Do you really want to reduce test/xxx? [y/n]: y
  Size of logical volume test/xxx changed from <29.98 GiB (3837 extents) to <19.98 GiB (2557 extents).
  Logical volume test/xxx successfully resized.
[root@test-centos7-node1 ~]# lvs
  LV   VG   Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  xxx  test -wi-a----- <19.98g                                                    
[root@test-centos7-node1 ~]# lvdisplay 
  --- Logical volume ---
  LV Path                https://img.qb5200.com/download-x/dev/test/xxx
  LV Name                xxx
  VG Name                test
  LV UUID                uhZZaz-Odd9-ibwY-2Z1Z-ZmNY-eZF7-0lXERT
  LV Write Access        read/write
  LV Creation host, time test-centos7-node1, 2020-01-06 10:32:42 -0500
  LV Status              available
  # open                 0
  LV Size                <19.98 GiB
  Current LE             2557
  Segments               2
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     8192
  Block device           253:0
   
[root@test-centos7-node1 ~]#

  4)挂载

[root@test-centos7-node1 ~]# mount https://img.qb5200.com/download-x/dev/test/xxx /mnt
mount: https://img.qb5200.com/download-x/dev/mapper/test-xxx: can't read superblock
[root@test-centos7-node1 ~]# 

  说明:做到这里发现一个问题,xfs文件系统是不支持逻辑卷缩减的,为什么呢?xfs的文件系统调整命令是xfs_growfs 这个命令只支持增大的操作。我们在调整lv大小的时候实际上是把文件系统给破坏了,要想缩减空间,就必须重新格式化后在挂载,这样一来如果原有的盘里有数据就丢了。所以xfs上做LV的缩减没有意义

[root@test-centos7-node1 ~]# mkfs.xfs https://img.qb5200.com/download-x/dev/test/xxx -f
meta-data=https://img.qb5200.com/download-x/dev/test/xxx          isize=512    agcount=4, agsize=1309184 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=1        finobt=0, sparse=0
data     =                       bsize=4096   blocks=5236736, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
log      =internal log           bsize=4096   blocks=2560, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
[root@test-centos7-node1 ~]# mount  https://img.qb5200.com/download-x/dev/test/xxx  /mnt
[root@test-centos7-node1 ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
https://img.qb5200.com/download-x/dev/sda3              46G  1.6G   45G   4% /
devtmpfs              1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev
tmpfs                 1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev/shm
tmpfs                 1.9G  8.6M  1.9G   1% /run
tmpfs                 1.9G     0  1.9G   0% /sys/fs/cgroup
https://img.qb5200.com/download-x/dev/sda1             2.0G  135M  1.9G   7% /boot
tmpfs                 378M     0  378M   0% /run/user/0
https://img.qb5200.com/download-x/dev/mapper/test-xxx   20G   33M   20G   1% /mnt
[root@test-centos7-node1 ~]

  五、缩减LV(ext系列文件系统)

  1)卸载已挂载的LV

[root@test-centos7-node1 ~]# df -Th
Filesystem           Type      Size  Used Avail Use% Mounted on
https://img.qb5200.com/download-x/dev/sda3            xfs        46G  1.6G   45G   4% /
devtmpfs             devtmpfs  1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev
tmpfs                tmpfs     1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev/shm
tmpfs                tmpfs     1.9G  8.6M  1.9G   1% /run
tmpfs                tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
https://img.qb5200.com/download-x/dev/sda1            xfs       2.0G  135M  1.9G   7% /boot
tmpfs                tmpfs     378M     0  378M   0% /run/user/0
https://img.qb5200.com/download-x/dev/mapper/test-xxx ext4       20G   45M   19G   1% /mnt
[root@test-centos7-node1 ~]# umount /mnt
[root@test-centos7-node1 ~]# df -Th     
Filesystem     Type      Size  Used Avail Use% Mounted on
https://img.qb5200.com/download-x/dev/sda3      xfs        46G  1.6G   45G   4% /
devtmpfs       devtmpfs  1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev
tmpfs          tmpfs     1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev/shm
tmpfs          tmpfs     1.9G  8.6M  1.9G   1% /run
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
https://img.qb5200.com/download-x/dev/sda1      xfs       2.0G  135M  1.9G   7% /boot
tmpfs          tmpfs     378M     0  378M   0% /run/user/0
[root@test-centos7-node1 ~]# 

  2)强制执行磁盘检测

[root@test-centos7-node1 ~]# e2fsck -f https://img.qb5200.com/download-x/dev/test/xxx 
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
https://img.qb5200.com/download-x/dev/test/xxx: 11/1310720 files (0.0% non-contiguous), 126322/5236736 blocks
[root@test-centos7-node1 ~]# 

  说明:这一步我们在不执行的话,直接下一步它也会提示我们先做磁盘检测

  3)调整文件系统大小

[root@test-centos7-node1 ~]# resize2fs https://img.qb5200.com/download-x/dev/test/xxx 12G
resize2fs 1.42.9 (28-Dec-2013)
Resizing the filesystem on https://img.qb5200.com/download-x/dev/test/xxx to 3145728 (4k) blocks.
The filesystem on https://img.qb5200.com/download-x/dev/test/xxx is now 3145728 blocks long.

[root@test-centos7-node1 ~]# 

  4)调整LV的大小

[root@test-centos7-node1 ~]# lvreduce -L 12G https://img.qb5200.com/download-x/dev/test/xxx 
  WARNING: Reducing active logical volume to 12.00 GiB.
  THIS MAY DESTROY YOUR DATA (filesystem etc.)
Do you really want to reduce test/xxx? [y/n]: y
  Size of logical volume test/xxx changed from <19.98 GiB (2557 extents) to 12.00 GiB (1536 extents).
  Logical volume test/xxx successfully resized.
[root@test-centos7-node1 ~]# lvs
  LV   VG   Attr       LSize  Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  xxx  test -wi-a----- 12.00g                                                    
[root@test-centos7-node1 ~]# 

   说明:这里缩减到的空间需同文件系统的大小一致或者缩减后的空间比文件系统调整的空间要大才行,这样才不能损坏文件系统,切记不能比文件系统调整的空间还小,小了,在缩减空间的时候就破坏了文件系统,会导致后续的挂载无法进行。

  5)挂载

[root@test-centos7-node1 ~]# mount https://img.qb5200.com/download-x/dev/test/xxx /mnt
[root@test-centos7-node1 ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
https://img.qb5200.com/download-x/dev/sda3              46G  1.6G   45G   4% /
devtmpfs              1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev
tmpfs                 1.9G     0  1.9G   0% https://img.qb5200.com/download-x/dev/shm
tmpfs                 1.9G  8.6M  1.9G   1% /run
tmpfs                 1.9G     0  1.9G   0% /sys/fs/cgroup
https://img.qb5200.com/download-x/dev/sda1             2.0G  135M  1.9G   7% /boot
tmpfs                 378M     0  378M   0% /run/user/0
https://img.qb5200.com/download-x/dev/mapper/test-xxx   12G   41M   12G   1% /mnt
[root@test-centos7-node1 ~]# 

  

加载全部内容

相关教程
猜你喜欢
用户评论