亲宝软件园·资讯

展开

spring 加载bean 详解Spring中Bean的加载的方法

weknow 人气:0
想了解详解Spring中Bean的加载的方法的相关内容吗,weknow在本文为您仔细讲解spring 加载bean的相关知识和一些Code实例,欢迎阅读和指正,我们先划重点:spring,加载bean,spring,bean加载过程,spring,动态加载bean,下面大家一起来学习吧。

之前写过bean的解析,这篇来讲讲bean的加载,加载要比bean的解析复杂些,从之前的例子开始.

Spring中加载一个bean的方式:

TestBean bean = factory.getBean("testBean");

来看看getBean(String name)方法源码,

@Override
public Object getBean(String name) throws BeansException {
  return doGetBean(name, null, null, false);
}

该getBean(String name)方法位于AbstractBeanFactory抽象类中,AbstractBeanFactory与XmlBeanFactory类关系可以看下图:

接下去跟进doGetBean()方法源码:

protected <T> T doGetBean(
    final String name, final Class<T> requiredType, final Object[] args, boolean typeCheckOnly)
    throws BeansException {
  // 提取beanName
  final String beanName = transformedBeanName(name);
  Object bean;

  // 试着从缓存或实例工厂中获取
  Object sharedInstance = getSingleton(beanName);
  if (sharedInstance != null && args == null) {
    if (logger.isDebugEnabled()) {
      if (isSingletonCurrentlyInCreation(beanName)) {
        logger.debug("Returning eagerly cached instance of singleton bean '" + beanName +
            "' that is not fully initialized yet - a consequence of a circular reference");
      }
      else {
        logger.debug("Returning cached instance of singleton bean '" + beanName + "'");
      }
    }
    // 返回实例,有时存在如BeanFactory这样情况时并不是直接返回实例本身而是返回指定方法返回的实例
    bean = getObjectForBeanInstance(sharedInstance, name, beanName, null);
  }

  else {
    // Fail if we're already creating this bean instance:
    // We're assumably within a circular reference.
    if (isPrototypeCurrentlyInCreation(beanName)) {
      throw new BeanCurrentlyInCreationException(beanName);
    }

    // Check if bean definition exists in this factory.
    BeanFactory parentBeanFactory = getParentBeanFactory();
    // 如果在所有已经加载的类中没有beanName则会尝试从parentBeanFactory中检测
    if (parentBeanFactory != null && !containsBeanDefinition(beanName)) {
      // Not found -> check parent.
      String nameToLookup = originalBeanName(name);
      // 到BeanFactory查找
      if (args != null) {
        // Delegation to parent with explicit args.
        return (T) parentBeanFactory.getBean(nameToLookup, args);
      }
      else {
        // No args -> delegate to standard getBean method.
        return parentBeanFactory.getBean(nameToLookup, requiredType);
      }
    }
    // 如果不是只做类型检查则是创建bean
    if (!typeCheckOnly) {
      markBeanAsCreated(beanName);
    }

    try {
      // 将存储XML配置文件的GernericBeanDefinition转换成RootBeanDefinition,如果BeanName是子Bean的话会合并父类的相关属性
      final RootBeanDefinition mbd = getMergedLocalBeanDefinition(beanName);
      checkMergedBeanDefinition(mbd, beanName, args);

      // Guarantee initialization of beans that the current bean depends on.
      String[] dependsOn = mbd.getDependsOn();
      // 如果存在依赖的话要递归实例化依赖的bean
      if (dependsOn != null) {
        for (String dependsOnBean : dependsOn) {
          if (isDependent(beanName, dependsOnBean)) {
            throw new BeanCreationException(mbd.getResourceDescription(), beanName,
                "Circular depends-on relationship between '" + beanName + "' and '" + dependsOnBean + "'");
          }
          registerDependentBean(dependsOnBean, beanName);
          getBean(dependsOnBean);
        }
      }

      // Create bean instance.
      // 依赖的bean实例化完后就可以实例化mbd了
      if (mbd.isSingleton()) {
        sharedInstance = getSingleton(beanName, new ObjectFactory<Object>() {
          @Override
          public Object getObject() throws BeansException {
            try {
              return createBean(beanName, mbd, args);
            }
            catch (BeansException ex) {
              // Explicitly remove instance from singleton cache: It might have been put there
              // eagerly by the creation process, to allow for circular reference resolution.
              // Also remove any beans that received a temporary reference to the bean.
              destroySingleton(beanName);
              throw ex;
            }
          }
        });
        bean = getObjectForBeanInstance(sharedInstance, name, beanName, mbd);
      }

      else if (mbd.isPrototype()) {
        // It's a prototype -> create a new instance.
        Object prototypeInstance = null;
        try {
          beforePrototypeCreation(beanName);
          prototypeInstance = createBean(beanName, mbd, args);
        }
        finally {
          afterPrototypeCreation(beanName);
        }
        bean = getObjectForBeanInstance(prototypeInstance, name, beanName, mbd);
      }

      else {
        // 在对应的scope上实例化bean
        String scopeName = mbd.getScope();
        final Scope scope = this.scopes.get(scopeName);
        if (scope == null) {
          throw new IllegalStateException("No Scope registered for scope '" + scopeName + "'");
        }
        try {
          Object scopedInstance = scope.get(beanName, new ObjectFactory<Object>() {
            @Override
            public Object getObject() throws BeansException {
              beforePrototypeCreation(beanName);
              try {
                return createBean(beanName, mbd, args);
              }
              finally {
                afterPrototypeCreation(beanName);
              }
            }
          });
          bean = getObjectForBeanInstance(scopedInstance, name, beanName, mbd);
        }
        catch (IllegalStateException ex) {
          throw new BeanCreationException(beanName,
              "Scope '" + scopeName + "' is not active for the current thread; " +
              "consider defining a scoped proxy for this bean if you intend to refer to it from a singleton",
              ex);
        }
      }
    }
    catch (BeansException ex) {
      cleanupAfterBeanCreationFailure(beanName);
      throw ex;
    }
  }

  // 检查需要的类型是否符合实例bean的实际类型
  if (requiredType != null && bean != null && !requiredType.isAssignableFrom(bean.getClass())) {
    try {
      return getTypeConverter().convertIfNecessary(bean, requiredType);
    }
    catch (TypeMismatchException ex) {
      if (logger.isDebugEnabled()) {
        logger.debug("Failed to convert bean '" + name + "' to required type [" +
            ClassUtils.getQualifiedName(requiredType) + "]", ex);
      }
      throw new BeanNotOfRequiredTypeException(name, requiredType, bean.getClass());
    }
  }
  return (T) bean;
}

整个bean加载的过程步骤相对繁琐,主要步骤有以下几点:

1、转换beanName

要知道平时开发中传入的参数name可能只是别名,也可能是FactoryBean,所以需要进行解析转换,一般会进行以下解析:

(1)消除修饰符,比如name="&test",会去除&使name="test";

(2)取alias表示的最后的beanName,比如别名test01指向名称为test02的bean则返回test02。

2、从缓存中加载实例

实例在Spring的同一个容器中只会被创建一次,后面再想获取该bean时,就会尝试从缓存中获取;如果获取不到的话再从singletonFactories中加载。

3、实例化bean

缓存中记录的bean一般只是最原始的bean状态,这时就需要对bean进行实例化。如果得到的是bean的原始状态,但又要对bean进行处理,这时真正需要的是工厂bean中定义的factory-method方法中返回的bean,上面源码中的getObjectForBeanInstance就是来完成这个工作的。

4、检测parentBeanFacotory

从源码可以看出如果缓存中没有数据会转到父类工厂去加载,源码中的!containsBeanDefinition(beanName)就是检测如果当前加载的xml配置文件中不包含beanName所对应的配置,就只能到parentBeanFacotory去尝试加载bean。

5、存储XML配置文件的GernericBeanDefinition转换成RootBeanDefinition之前的文章介绍过XML配置文件中读取到的bean信息是存储在GernericBeanDefinition中的,但Bean的后续处理是针对于RootBeanDefinition的,所以需要转换后才能进行后续操作。

6、初始化依赖的bean

这里应该比较好理解,就是bean中可能依赖了其他bean属性,在初始化bean之前会先初始化这个bean所依赖的bean属性。

7、创建bean

Spring容器根据不同scope创建bean实例。

整个流程就是如此,下面会讲解一些重要步骤的源码。

上面有提到,单例在Spring中的同一容器中只会被创建一次,后面再获取bean的话会直接从缓存中获取,这里是尝试加载,先从缓存中加载,再次就是从singletonFactories中加载;因为在bean中可能会在依赖注入,要避免循环依赖,Spring创建bean时会不等bean创建完成就会将创建该bean的ObjectFactory提前曝光加入到缓存中,但下一个bean创建时要依赖上个bean的话,就直接使用ObjectFacotry。

@Override
public Object getSingleton(String beanName) {
  return getSingleton(beanName, true); // true表示允许早期依赖
}

protected Object getSingleton(String beanName, boolean allowEarlyReference) {
  // 尝试从缓存获取实例
  Object singletonObject = this.singletonObjects.get(beanName);
  if (singletonObject == null && isSingletonCurrentlyInCreation(beanName)) {
    synchronized (this.singletonObjects) {
      // 若该bean正在加载则不处理
      singletonObject = this.earlySingletonObjects.get(beanName);
      if (singletonObject == null && allowEarlyReference) {
        ObjectFactory<?> singletonFactory = this.singletonFactories.get(beanName);
        if (singletonFactory != null) {
          singletonObject = singletonFactory.getObject();
          // 存入到缓存中
          this.earlySingletonObjects.put(beanName, singletonObject);
          this.singletonFactories.remove(beanName);
        }
      }
    }
  }
  return (singletonObject != NULL_OBJECT ? singletonObject : null);
}
/* 这两个方法在DefaultSingletonBeanRegistry类中 */

从源码可以看出这个方法先尝试从singletonObjects中获取实例,如果获取不到值就从earlySingletonObject中去获取,如果再获取不到的话则到singletonFactories里获取beanName对应的ObjectFactory,再调用这个ObjectFactory的getObject来创建bean,并放到earlySingletonObject中,并且从singletonFactories里remove掉这个ObjectFactory。这里有几个存储bean的不同map:

  1. -singletonObjects:保存BeanName和创建bean实例之间的关系。
  2. -singletonFactories:保存BeanName和创建bean实例的工厂之间的关系。
  3. -earlySingletonObject:保存BeanName和创建bean实例之间的关系,与-singletonObjects不同的是当一个单例bean被放到里面后,那当bean在创建过程中,就可以通过getBean方法获取到,可以用来检测循环引用。
  4. -registeredSingletons:保存当前所有已注册的bean。

如果上面缓存中不存在已经加载的单例bean就要重新开始bean的加载过程了,Spring中使用getSingleton重载方法实现bean的加载过程。

public Object getSingleton(String beanName, ObjectFactory<?> singletonFactory) {
  Assert.notNull(beanName, "'beanName' must not be null");
  synchronized (this.singletonObjects) {
    // 先检查bean是否已经加载
    Object singletonObject = this.singletonObjects.get(beanName);
    // 如果空才进行singleton的bean的初始化
    if (singletonObject == null) {
      if (this.singletonsCurrentlyInDestruction) {
        throw new BeanCreationNotAllowedException(beanName,
            "Singleton bean creation not allowed while the singletons of this factory are in destruction " +
            "(Do not request a bean from a BeanFactory in a destroy method implementation!)");
      }
      if (logger.isDebugEnabled()) {
        logger.debug("Creating shared instance of singleton bean '" + beanName + "'");
      }
      beforeSingletonCreation(beanName);
      boolean newSingleton = false;
      boolean recordSuppressedExceptions = (this.suppressedExceptions == null);
      if (recordSuppressedExceptions) {
        this.suppressedExceptions = new LinkedHashSet<Exception>();
      }
      try {
        // 初始化bean
        singletonObject = singletonFactory.getObject();
        newSingleton = true;
      }
      catch (IllegalStateException ex) {
        // Has the singleton object implicitly appeared in the meantime ->
        // if yes, proceed with it since the exception indicates that state.
        singletonObject = this.singletonObjects.get(beanName);
        if (singletonObject == null) {
          throw ex;
        }
      }
      catch (BeanCreationException ex) {
        if (recordSuppressedExceptions) {
          for (Exception suppressedException : this.suppressedExceptions) {
            ex.addRelatedCause(suppressedException);
          }
        }
        throw ex;
      }
      finally {
        if (recordSuppressedExceptions) {
          this.suppressedExceptions = null;
        }
        afterSingletonCreation(beanName);
      }
      if (newSingleton) {
        // 存入缓存
        addSingleton(beanName, singletonObject);
      }
    }
    return (singletonObject != NULL_OBJECT ? singletonObject : null);
  }
}

这段代码使用了回调方法,使程序可以在单例创建的前后做一些准备及处理操作,真正的获取单例bean的方法其实并不是在这个方法实现的,而是在ObjectFactory类型的实例singletonFactory中实现的。

下面准备创建bean

看看createBean()方法源码(该方法在AbstractAutowireCapableBeanFactory类中):

protected Object createBean(final String beanName, final RootBeanDefinition mbd, final Object[] args)
    throws BeanCreationException {

  if (logger.isDebugEnabled()) {
    logger.debug("Creating instance of bean '" + beanName + "'");
  }
  // 锁定class,根据设置的class属性或根据className来解析Class
  resolveBeanClass(mbd, beanName);

  // 验证和准备覆盖的方法
  try {
    mbd.prepareMethodOverrides();
  }
  catch (BeanDefinitionValidationException ex) {
    throw new BeanDefinitionStoreException(mbd.getResourceDescription(),
        beanName, "Validation of method overrides failed", ex);
  }

  try {
    // 用BeanPostProcessors返回代理来替代真正的实例
    Object bean = resolveBeforeInstantiation(beanName, mbd);
    if (bean != null) {
      return bean;
    }
  }
  catch (Throwable ex) {
    throw new BeanCreationException(mbd.getResourceDescription(), beanName,
        "BeanPostProcessor before instantiation of bean failed", ex);
  }

  Object beanInstance = doCreateBean(beanName, mbd, args);
  if (logger.isDebugEnabled()) {
    logger.debug("Finished creating instance of bean '" + beanName + "'");
  }
  return beanInstance;
}

从createBean()方法源码可以看出主要做了以下操作:

  1. 根据设置的class属性或根据className来解析Class;
  2. 对覆盖进行标记并验证,在Spring配置中是存在lookup-mothod和replace-method的,这两个配置的加载其实就是将配置统一存放在BeanDefinition中的methodOverrides属性里,这个方法的操作也就是针对于这两个配置的;
  3. 应用初始化前的后处理器,最后创建bean。

在createBean()方法里执行完resolveBeforeInstantiation方法后,如果创建了代理且不为空的话就直接返回,否则需要进行常规bean的创建,这个创建过程是在doCreateBean中完成的,跟进源码:

protected Object doCreateBean(final String beanName, final RootBeanDefinition mbd, final Object[] args) {
  // Instantiate the bean.
  BeanWrapper instanceWrapper = null;
  if (mbd.isSingleton()) {
    instanceWrapper = this.factoryBeanInstanceCache.remove(beanName);
  }
  if (instanceWrapper == null) {
    // 根据指定bean使用相应策略创建实例
    instanceWrapper = createBeanInstance(beanName, mbd, args);
  }
  final Object bean = (instanceWrapper != null ? instanceWrapper.getWrappedInstance() : null);
  Class<?> beanType = (instanceWrapper != null ? instanceWrapper.getWrappedClass() : null);

  // Allow post-processors to modify the merged bean definition.
  synchronized (mbd.postProcessingLock) {
    if (!mbd.postProcessed) {
      applyMergedBeanDefinitionPostProcessors(mbd, beanType, beanName);
      mbd.postProcessed = true;
    }
  }

  // 检测循环依赖,是否需要提早曝光
  boolean earlySingletonExposure = (mbd.isSingleton() && this.allowCircularReferences &&
      isSingletonCurrentlyInCreation(beanName));
  if (earlySingletonExposure) {
    if (logger.isDebugEnabled()) {
      logger.debug("Eagerly caching bean '" + beanName +
          "' to allow for resolving potential circular references");
    }
    // 避免循环依赖,可以在bean初始化完成前将创建实例的ObjectFactory加入工厂
    addSingletonFactory(beanName, new ObjectFactory<Object>() {
      @Override
      public Object getObject() throws BeansException {
        // 对bean再次依赖引用
        // AOP也是在这里将advice动态织入bean中,若没有则直接返回bean,不做处理
        return getEarlyBeanReference(beanName, mbd, bean);
      }
    });
  }

  // Initialize the bean instance.
  Object exposedObject = bean;
  try {
    // 填充bean,注入属性值,如果存在依赖于其他bean的属性,会递归初始化
    populateBean(beanName, mbd, instanceWrapper);
    if (exposedObject != null) {
      // 调用初始化方法
      exposedObject = initializeBean(beanName, exposedObject, mbd);
    }
  }
  catch (Throwable ex) {
    if (ex instanceof BeanCreationException && beanName.equals(((BeanCreationException) ex).getBeanName())) {
      throw (BeanCreationException) ex;
    }
    else {
      throw new BeanCreationException(mbd.getResourceDescription(), beanName, "Initialization of bean failed", ex);
    }
  }

  if (earlySingletonExposure) {
    Object earlySingletonReference = getSingleton(beanName, false);
    // earlySingletonReference只有在检测到有循环依赖的情况下才会不为空
    if (earlySingletonReference != null) {
      if (exposedObject == bean) {
        exposedObject = earlySingletonReference;
      }
      else if (!this.allowRawInjectionDespiteWrapping && hasDependentBean(beanName)) {
        String[] dependentBeans = getDependentBeans(beanName);
        Set<String> actualDependentBeans = new LinkedHashSet<String>(dependentBeans.length);
        for (String dependentBean : dependentBeans) {
          // 检测依赖
          if (!removeSingletonIfCreatedForTypeCheckOnly(dependentBean)) {
            actualDependentBeans.add(dependentBean);
          }
        }
        if (!actualDependentBeans.isEmpty()) {
          throw new BeanCurrentlyInCreationException(beanName,
              "Bean with name '" + beanName + "' has been injected into other beans [" +
              StringUtils.collectionToCommaDelimitedString(actualDependentBeans) +
              "] in its raw version as part of a circular reference, but has eventually been " +
              "wrapped. This means that said other beans do not use the final version of the " +
              "bean. This is often the result of over-eager type matching - consider using " +
              "'getBeanNamesOfType' with the 'allowEagerInit' flag turned off, for example.");
        }
      }
    }
  }

  // Register bean as disposable.
  try {
    // 依据scopse注册bean
    registerDisposableBeanIfNecessary(beanName, bean, mbd);
  }
  catch (BeanDefinitionValidationException ex) {
    throw new BeanCreationException(mbd.getResourceDescription(), beanName, "Invalid destruction signature", ex);
  }

  return exposedObject;
}

上面源码完成的操作可以概括为以下几点:

  1. 开始是单例的话要先清除缓存;
  2. 实例化bean,将BeanDefinition转换为BeanWrapper;
  3. 使用MergedBeanDefinitionPostProcessor,Autowired注解就是通过此方法实现类型的预解析;
  4. 解决循环依赖问题;
  5. 填充属性,将属性填充到bean实例中;
  6. 注册DisposableBean;
  7. 创建完成并返回

接下来创建bean实例,看createBeanInstance()方法:

protected BeanWrapper createBeanInstance(String beanName, RootBeanDefinition mbd, Object[] args) {
  // 解析class
  Class<?> beanClass = resolveBeanClass(mbd, beanName);

  if (beanClass != null && !Modifier.isPublic(beanClass.getModifiers()) && !mbd.isNonPublicAccessAllowed()) {
    throw new BeanCreationException(mbd.getResourceDescription(), beanName,
        "Bean class isn't public, and non-public access not allowed: " + beanClass.getName());
  }

  // 若工厂方法不为空则使用工厂方法初始化
  if (mbd.getFactoryMethodName() != null) {
    return instantiateUsingFactoryMethod(beanName, mbd, args);
  }

  // Shortcut when re-creating the same bean...
  boolean resolved = false;
  boolean autowireNecessary = false;
  if (args == null) {
    synchronized (mbd.constructorArgumentLock) {
      if (mbd.resolvedConstructorOrFactoryMethod != null) {
        resolved = true;
        autowireNecessary = mbd.constructorArgumentsResolved;
      }
    }
  }
  // 如果已经解析过则使用解析好的构造方法不需要再次锁定
  if (resolved) {
    if (autowireNecessary) {
      // 构造方法自动注入
      return autowireConstructor(beanName, mbd, null, null);
    }
    else {
      // 使用默认构造方法
      return instantiateBean(beanName, mbd);
    }
  }

  // 根据参数解析构造方法
  Constructor<?>[] ctors = determineConstructorsFromBeanPostProcessors(beanClass, beanName);
  if (ctors != null ||
      mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_CONSTRUCTOR ||
      mbd.hasConstructorArgumentValues() || !ObjectUtils.isEmpty(args)) {
    return autowireConstructor(beanName, mbd, ctors, args);
  }

  // No special handling: simply use no-arg constructor.
  return instantiateBean(beanName, mbd);
}

可以看出如果在RootBeanDefinition中存在factoryMethodName属性,或者说配置文件中配置了factory-method,那么Spring会尝试使用instantiateUsingFactoryMethod(beanName, mbd, args)方法根据RootBeanDefinition中的配置生成bean实例。

再解析构造方法并进行实例化,Spring会根据参数及类型判断使用哪个构造方法再进行实例化。判断调用哪个构造方法的过程会采用缓存机制,如果已经解析过则不需要重复解析而是从RootBeanDefinition中的属性resolvedConstructorOrFactoryMethod缓存的值去取,不然则需要再次解析。

创建bean后接下来就进行属性注入,属性注入的操作在populateBean()方法中,跟进源码:

protected void populateBean(String beanName, RootBeanDefinition mbd, BeanWrapper bw) {
  PropertyValues pvs = mbd.getPropertyValues();

  if (bw == null) {
    if (!pvs.isEmpty()) {
      throw new BeanCreationException(
          mbd.getResourceDescription(), beanName, "Cannot apply property values to null instance");
    }
    else {
      // Skip property population phase for null instance.
      return;
    }
  }

  // Give any InstantiationAwareBeanPostProcessors the opportunity to modify the
  // state of the bean before properties are set. This can be used, for example,
  // to support styles of field injection.
  boolean continueWithPropertyPopulation = true;

  if (!mbd.isSynthetic() && hasInstantiationAwareBeanPostProcessors()) {
    for (BeanPostProcessor bp : getBeanPostProcessors()) {
      if (bp instanceof InstantiationAwareBeanPostProcessor) {
        InstantiationAwareBeanPostProcessor ibp = (InstantiationAwareBeanPostProcessor) bp;
        if (!ibp.postProcessAfterInstantiation(bw.getWrappedInstance(), beanName)) {
          continueWithPropertyPopulation = false;
          break;
        }
      }
    }
  }

  if (!continueWithPropertyPopulation) {
    return;
  }

  if (mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_BY_NAME ||
      mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_BY_TYPE) {
    MutablePropertyValues newPvs = new MutablePropertyValues(pvs);

    // Add property values based on autowire by name if applicable.
    if (mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_BY_NAME) {
      autowireByName(beanName, mbd, bw, newPvs);
    }

    // Add property values based on autowire by type if applicable.
    if (mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_BY_TYPE) {
      autowireByType(beanName, mbd, bw, newPvs);
    }

    pvs = newPvs;
  }

  boolean hasInstAwareBpps = hasInstantiationAwareBeanPostProcessors();
  boolean needsDepCheck = (mbd.getDependencyCheck() != RootBeanDefinition.DEPENDENCY_CHECK_NONE);

  if (hasInstAwareBpps || needsDepCheck) {
    PropertyDescriptor[] filteredPds = filterPropertyDescriptorsForDependencyCheck(bw, mbd.allowCaching);
    if (hasInstAwareBpps) {
      for (BeanPostProcessor bp : getBeanPostProcessors()) {
        if (bp instanceof InstantiationAwareBeanPostProcessor) {
          InstantiationAwareBeanPostProcessor ibp = (InstantiationAwareBeanPostProcessor) bp;
          pvs = ibp.postProcessPropertyValues(pvs, filteredPds, bw.getWrappedInstance(), beanName);
          if (pvs == null) {
            return;
          }
        }
      }
    }
    if (needsDepCheck) {
      checkDependencies(beanName, mbd, filteredPds, pvs);
    }
  }

  applyPropertyValues(beanName, mbd, bw, pvs);
}

在populateBean方法的中的主要处理流程:

  1. InstantiationAwareBeanPostProcessor处理器的postProcessAfterInstantiation方法控制程序是否继续填充属性;
  2. 根据注入类型提取依赖的bean,并存入PropertyValues中;
  3. 应用InstantiationAwareBeanPostProcessor处理器的postProcessPropertyValues方法对属性在填充前再次处理,主要还是验证属性;
  4. 将所有PropertyValues中的属性填充到BeanWrapper中。

最后初始化bean

学过Spring的都知道bean配置时有一个init-method属性,这个属性的作用是在bean实例化前调用init-method指定的方法进行需要的实例化操作,现在就进入这个方法了;Spring中程序已经执行过bean的实例化,并且进行了属性的填充,而就在这时将会调用用户设定的初始化方法。

protected Object initializeBean(final String beanName, final Object bean, RootBeanDefinition mbd) {
  if (System.getSecurityManager() != null) {
    AccessController.doPrivileged(new PrivilegedAction<Object>() {
      @Override
      public Object run() {
        invokeAwareMethods(beanName, bean);
        return null;
      }
    }, getAccessControlContext());
  }
  else {
    // 特殊bean处理
    invokeAwareMethods(beanName, bean);
  }

  Object wrappedBean = bean;
  if (mbd == null || !mbd.isSynthetic()) {
    wrappedBean = applyBeanPostProcessorsBeforeInitialization(wrappedBean, beanName);
  }

  try {
    invokeInitMethods(beanName, wrappedBean, mbd);
  }
  catch (Throwable ex) {
    throw new BeanCreationException(
        (mbd != null ? mbd.getResourceDescription() : null),
        beanName, "Invocation of init method failed", ex);
  }

  if (mbd == null || !mbd.isSynthetic()) {
    wrappedBean = applyBeanPostProcessorsAfterInitialization(wrappedBean, beanName);
  }
  return wrappedBean;
}

最后加载完Bean并执行完初始化操作后,一个bean的加载基本就结束了。

加载全部内容

相关教程
猜你喜欢
用户评论