亲宝软件园·资讯

展开

Spring Validation实现 Spring Validation方法实现原理分析

68号小喇叭 人气:0

最近要做动态数据的提交处理,即需要分析提交数据字段定义信息后才能明确对应的具体字段类型,进而做数据类型转换和字段有效性校验,然后做业务处理后提交数据库,自己开发一套校验逻辑的话周期太长,因此分析了Spring Validation的实现原理,复用了其底层花样繁多的Validator,在此将分析Spring Validation原理的过程记录下,不深入细节

如何使用Spring Validation

Spring Bean初始化时校验Bean是否符合JSR-303规范

1、手动添加BeanValidationPostProcessor Bean

2、在model类中定义校验规则,如@Max、@Min、@NotEmpty

3、声明Bean,综合代码如下:

@Bean
public BeanPostProcessor beanValidationPostProcessor() {
  return new BeanValidationPostProcessor();
}

@Bean
public UserModel getUserModel() {
  UserModel userModel = new UserModel();
  userModel.setUsername(null);
  userModel.setPassword("123");
  return userModel;
}

@Data
class UserModel {
  @NotNull(message = "username can not be null")
  @Pattern(regexp = "[a-zA-Z0-9_]{5,10}", message = "username is illegal")
  private String username;
  @Size(min = 5, max = 10, message = "password's length is illegal")
  private String password;
}

4、BeanValidationPostProcessor Bean内部有个boolean类型的属性afterInitialization,默认是false,如果是false,在postProcessBeforeInitialization过程中对bean进行验证,否则在postProcessAfterInitialization过程对bean进行验证

5、此种校验使用了spring的BeanPostProcessor逻辑

6、校验底层调用了doValidate方法,进一步调用validator.validate,默认validator为HibernateValidator,validation-api包为JAVA规范,Spring默认的规范实现为hibernate-validator包,此hibernate非ORM框架Hibernate

protected void doValidate(Object bean) {
 Assert.state(this.validator != null, "No Validator set");
 Set<ConstraintViolation<Object>> result = this.validator.validate(bean);

7、HibernateValidator默认调用ValidatorFactoryImpl来生成validator,后面展开将ValidatorFactoryImpl

支持方法级别的JSR-303规范

1、手动添加MethodValidationPostProcessor Bean

2、类上加上@Validated注解(也支持自定义注解,创建MethodValidationPostProcessor Bean时传入)

3、在方法的参数中加上验证注解,比如@Max、@Min、@NotEmpty、@NotNull等,如

@Component
@Validated
public class BeanForMethodValidation {
  public void validate(@NotEmpty String name, @Min(10) int age) {
    System.out.println("validate, name: " + name + ", age: " + age);
  }
}

4、MethodValidationPostProcessor内部使用aop完成对方法的调用

public void afterPropertiesSet() {
  Pointcut pointcut = new `AnnotationMatchingPointcut`(this.validatedAnnotationType, true);
  this.advisor = new `DefaultPointcutAdvisor`(pointcut, createMethodValidationAdvice(this.validator));
}
protected Advice createMethodValidationAdvice(@Nullable Validator validator) {
 return (validator != null ? new `MethodValidationInterceptor`(validator) : new MethodValidationInterceptor());
}

5、底层同样默认调用ValidatorFactoryImpl来生成validator,由validator完成校验

直接编码调用校验逻辑,如

public class Person {
@NotNull(message = "性别不能为空")
private Gender gender;
@Min(10)
private Integer age;
...
}
ValidatorFactory validatorFactory = Validation.buildDefaultValidatorFactory();
Validator validator = validatorFactory.getValidator();
Person person = new Person();
person.setGender(Gender.Man);
validator.validate(person);

同上,默认调用ValidatorFactoryImpl来生成validator,由validator完成具体校验

在Spring controller方法参数中使用valid或validated注解标注待校验参数

1、先熟悉下Spring的请求调用流程

2、可以看到在各种resolver处理请求参数的过程中做了参数校验

3、底层统一调用了DataBinder的validate方法

4、DataBinder的作用:Binder that allows for setting property values onto a target object, including support for validation and binding result analysis,也就是binder处理了request提交的字符串形式的参数,将其转换成服务端真正需要的类型,binder提供了对validation的支持,可以存放校验结果

5、DataBinder的validator默认在ConfigurableWebBindingInitializer中初始化,默认使用OptionalValidatorFactoryBean,该Bean继承了LocalValidatorFactoryBean,LocalValidatorFactoryBean组合了ValidatorFactory、自定义校验属性等各种校验会用到的信息,默认使用ValidatorFactoryImpl来获取validator

至此,所有的线索都指向了ValidatorFactoryImpl,下面分析下该类

public Validator `getValidator`() {
 return `createValidator`(
 constraintValidatorManager.getDefaultConstraintValidatorFactory(),
 valueExtractorManager,
 validatorFactoryScopedContext,
 methodValidationConfiguration
 );
}
Validator `createValidator`(ConstraintValidatorFactory constraintValidatorFactory,
 ValueExtractorManager valueExtractorManager,
 ValidatorFactoryScopedContext validatorFactoryScopedContext,
 MethodValidationConfiguration methodValidationConfiguration) {
 
 BeanMetaDataManager beanMetaDataManager = beanMetaDataManagers.computeIfAbsent(
 new BeanMetaDataManagerKey( validatorFactoryScopedContext.getParameterNameProvider(), valueExtractorManager, methodValidationConfiguration ),
 key -> new BeanMetaDataManager(
  `constraintHelper`,
  executableHelper,
  typeResolutionHelper,
  validatorFactoryScopedContext.getParameterNameProvider(),
  valueExtractorManager,
  validationOrderGenerator,
  buildDataProviders(),
  methodValidationConfiguration
 )
 );
  
    return `new ValidatorImpl`(
  constraintValidatorFactory,
  beanMetaDataManager,
  valueExtractorManager,
  constraintValidatorManager,
  validationOrderGenerator,
  validatorFactoryScopedContext
 );
}
public final <T> Set<ConstraintViolation<T>> validate(T object, Class<?>... groups) {
 Contracts.assertNotNull( object, MESSAGES.validatedObjectMustNotBeNull() );
 sanityCheckGroups( groups );

 ValidationContext<T> validationContext = `getValidationContextBuilder().forValidate( object )`;

 if ( !validationContext.getRootBeanMetaData().hasConstraints() ) {
 return Collections.emptySet();
 }

 ValidationOrder validationOrder = determineGroupValidationOrder( groups );
 ValueContext<?, Object> valueContext = `ValueContext.getLocalExecutionContext`(
  validatorScopedContext.getParameterNameProvider(),
  object,
  validationContext.getRootBeanMetaData(),
  PathImpl.createRootPath()
 );

 return validateInContext( validationContext, valueContext, validationOrder );
}

1、getValidator->createValidator->ValidatorImpl->validate

在执行过程中封装了beanMetaDataManager、validationContext、valueContext等内容,都是校验时会用到的上下文信息,如待校验bean的所有校验项(含父类和接口)、property、method parameter的校验信息,从ValidatorFactoryScopedContext继承过来的validator通用的各种工具类(如message、script等的处理)等,内容比较复杂

2、分组(group)校验忽略,来到默认分组处理validateConstraintsForDefaultGroup->validateConstraintsForSingleDefaultGroupElement->validateMetaConstraint(注:metaConstraints维护了该bean类型及其父类、接口的所有校验,需要遍历调用validateMetaConstraint)

3、继续调用MetaConstraint的doValidateConstraint方法,根据不同的annotation type走不同的ConstraintTree

public static <U extends Annotation> ConstraintTree<U> of(ConstraintDescriptorImpl<U> composingDescriptor, Type validatedValueType) {
 if ( composingDescriptor.getComposingConstraintImpls().isEmpty() ) {
 return new SimpleConstraintTree<>( composingDescriptor, validatedValueType );
 }
 else {
 return new ComposingConstraintTree<>( composingDescriptor, validatedValueType );
 }
}

4、具体哪些走simple,哪些走composing暂且不管,因为二者都调用了ConstraintTree的'getInitializedConstraintValidator'方法,该步用来获取校验annotation(如DecimalMax、NotEmpty等)对应的validator并初始化validator

5、 ConstraintHelper 类维护了所有builtin的validator,并根据校验annotation(如DecimalMax)分类,validator的描述类中维护了该validator的泛型模板(如BigDecimal),如下:

putConstraints( tmpConstraints, DecimalMax.class, Arrays.asList(
 DecimalMaxValidatorForBigDecimal.class,
 DecimalMaxValidatorForBigInteger.class,
 DecimalMaxValidatorForDouble.class,
 DecimalMaxValidatorForFloat.class,
 DecimalMaxValidatorForLong.class,
 DecimalMaxValidatorForNumber.class,
 DecimalMaxValidatorForCharSequence.class,
 DecimalMaxValidatorForMonetaryAmount.class
) );

在获取具体bean类的validator时,先根据annotation获取所有的validator,对应方法是ConstraintManager.findMatchingValidatorDescriptor,然后根据被校验对象的类型获取唯一的validator

6、然后根据上下文信息initializeValidator,进而调用validator的isValid方法校验

加载全部内容

相关教程
猜你喜欢
用户评论