亲宝软件园·资讯

展开

python SSH隧道

清水雅然君 人气:0

开发原因

MobaXterm作为一个全能型终端神器,功能十分强大,我经常使用其中隧道功能,使用内部无法直接服务器,查询数据,一般来说,一个本地端口对于一个隧道,但是MobaXterm,免费版本最多只能建立三个隧道,比如,我需要一次查询统计,就会用到四个隧道的操作,就非常不方便,需要调整一个隧道,于是,便用python写了多隧道的客户端

效果图

界面使用tkinter实现,左边是输入隧道的信息,右边为历史列表,

源码分析

构建隧道

def operate_sshtunnel(tunnel_info):
    try:
        tunnel = SSHTunnelForwarder(
            (tunnel_info.ssh_ip, int(tunnel_info.ssh_port)),
            ssh_username=tunnel_info.ssh_username,
            ssh_password=tunnel_info.ssh_password,
            remote_bind_address=(tunnel_info.remote_ip, int(tunnel_info.remote_port)),
            local_bind_address=('127.0.0.1', int(tunnel_info.localhost_port))
        )
        return tunnel
    except Exception as e:
        print(e.args[0])
        messagebox.showinfo(title='连接异常', message=e.args[0])
        return

这段代码就是整个功能的核心代码,使用SSHTunnelForwarder模块的sshtunnel

构建隧道,由于我只需要一个本地端口访问远程远程服务器的功能,默认本地端口固定为127.0.0.1

初始化加载

def read_json():
    if os.path.exists('tunnel_data.json'):
        with open('tunnel_data.json', 'r', encoding='utf-8') as load_f:
            data = load_f.read()
        if len(data) > 0:
            json_str = cryptocode.decrypt(data, "EjdeB55cvQMN2WHf")
            return json.loads(json_str)
        else:
            return
def load_config():
    load_arr = read_json()
    if load_arr is not None:
        for tunnel_info_json in load_arr:
            tunnel_info = tunnel_info_class()
            tunnel_info.localhost_port = tunnel_info_json['localhost_port']
            tunnel_info.ssh_ip = tunnel_info_json['ssh_ip']
            tunnel_info.ssh_port = tunnel_info_json['ssh_port']
            tunnel_info.ssh_username = tunnel_info_json['ssh_username']
            tunnel_info.ssh_password = cryptocode.decrypt(tunnel_info_json['ssh_password'], "F1jgEg1arVyxmUqC")
            tunnel_info.remote_ip = tunnel_info_json['remote_ip']
            tunnel_info.remote_port = tunnel_info_json['remote_port']
            tunnel_info.tunnel_name = tunnel_info_json['tunnel_name']
            tree_id = insert_tree_view(tunnel_info, "未启动")
            tunnel_infos.update({tree_id: tunnel_info})

read_json是读取历史记录,其中使用 cryptocode模版对明文的json进行加密,并且对ssh_password进行再加密

开始服务

def start_tunnel():
    iid = treeview.selection()
    if len(iid) > 0:
        if iid not in tunnel_infos_start.keys():
            tunnel_info = tunnel_infos[iid[0]]
            tunnel = ssl_tunnel.operate_sshtunnel(tunnel_info)
            if tunnel is not None:
                try:
                    tunnel.start()
                    tunnel_infos_start.update({iid[0]: tunnel})
                    update_tree_view(iid[0], tunnel_info, "启动")
                    pass
                except Exception  as e:
                    messagebox.showinfo(title='连接异常', message=e.args[0])
    else:
        messagebox.showinfo(title='选择异常', message="未选择列表")

tunnel_infos为报存的隧道信息字典,tunnel_infos_start为报存的已经启动的隧道字典,先获取点击到的行的ID,然后查询是否在已启动的字典中,如果不存在则,启动隧道,同时更新到tunnel_infos_start

停止服务

def stop_tunnel():
    iid = treeview.selection()
    if len(iid) > 0:
        if iid[0] in tunnel_infos_start.keys():
            tunnel_info = tunnel_infos[iid[0]]
            tunnel = tunnel_infos_start[iid[0]]
            if tunnel is not None:
                try:
                    tunnel.stop()
                    tunnel_infos_start.pop(iid[0])
                    update_tree_view(iid[0], tunnel_info, "未启动")
                    pass
                except Exception  as e:
                    messagebox.showinfo(title='连接异常', message=e.args[0])
    else:
        messagebox.showinfo(title='选择异常', message="未选择列表")

这段代码操作和启动相反,则是从停止掉服务,同时从tunnel_infos_start中移除掉该隧道

移除服务

def remove_tunnel():
    iid = treeview.selection()
    if len(iid) > 0:
        if iid[0] in tunnel_infos_start.keys():
            stop_tunnel()
        ## 从列表删除
        treeview.delete(iid)
        tunnel_infos.pop(iid[0])
        write_json()
    else:
        messagebox.showinfo(title='选择异常', message="未选择列表")

移除服务的时候,会判断IDtunnel_infos_start是否存在,存在则表明当前删除的隧道还在启动中,则停止这个服务,同时从tunnel_infos移除这配置,更新tunnel_data.json文件

不足之处

虽然这个简单的工具可以满足超过多个隧道的使用,但是每次报存的时候,都要更新tunnel_data.json文件,如果隧道比较多,加载比较费时间;同时由于设计界面的时候,考虑比较简单,并不支持修改的功能,只能删除错误的记录,然后重新报存

源码地址

https://github.com/liuhao192/ssh_tunnel

加载全部内容

相关教程
猜你喜欢
用户评论