亲宝软件园·资讯

展开

Redis中AOF与RDB持久化策略深入分析

基层搬砖的Panda 人气:0

写在前面

以下内容是基于Redis 6.2.6 版本整理总结

一、Redis为什么要持久化

Redis 是一个内存数据库,就是将数据库中的内容保存在内存中,这与传统的MySQL,Oracle等关系型数据库直接将内容保存到硬盘中相比,内存数据库的读写效率比传统数据库要快的多(内存的读写效率远远大于硬盘的读写效率)。但是内存中存储的缺点就是,一旦断电或者宕机,那么内存数据库中的数据将会全部丢失。而且,有时候redis需要重启,要加载回原来的状态,也需要持久化重启之前的状态。

为了解决这个缺点,Redis提供了将内存数据持久化到硬盘,以及用持久化文件来恢复数据库数据的功能。Redis 支持两种形式的持久化,一种是RDB快照(snapshotting),另外一种是AOF(append-only-file)。从Redis4.0版本开始还通过RDB和AOF的混合持久化。

二、Redis的持久化方式

2.1. AOF持久化(Append of file)

OF采用的就是顺序追加的方式,对于磁盘来说,顺序写是最快、最友好的方式。AOF文件存储的是redis命令协议格式的数据。Redis通过重放AOF文件,也就是执行AOF文件里的命令,来恢复数据。

2.1.1 fsync 系统调用

fsync 是系统调动。内核自己的机制,调用fysnc把数据从内核缓冲区刷到磁盘。如果想主动刷盘,就write完调用一次fysnc。

2.1.2 AOF持久化策略

缺点:

对数据库所有的修改命令(增删改)都会记录到AOF文件,数据冗余,随着运行时间增加,AOF文件会太过庞大,导致恢复速度变慢。比如:set key v1 ,set key v2 ,del key , set key v3,这四条命令都会被记录。但最终的状态就是key == v3,其余的命令就是冗余的数据。也就是说,我们只需要最后一个状态即可。

2.1.3 aof_rewrite

redis针对AOF文件过大的问题,推出了aof_rewrite来优化。aof_rewrite 原理:通过 fork 进程,在子进程中根据当前内存中的数据状态,生成命令协议数据,也就是最新的状态保存到aof文件,避免同一个key的历史数据冗余,提升恢复速度。

在重写aof期间,redis的主进程还在继续响应客户端的请求,redis会将写请求写到重写的缓冲区,等到子进程aof持久化结束,给主进程发信号,主进程再将重写缓冲区的数据追加到新的aof文件中。

虽然rewrite后AOF文件会变小,但aof还是要通过重放的方式恢复数据,需要耗费cpu资源,比较慢。

2.2 RDB快照(redis默认持久化方式)

RDB是把当前内存中的数据集快照写入磁盘RDB文件,也就是 Snapshot 快照(数据库中所有键值对二进制数据)。恢复时是将快照文件直接读到内存里。也是通过fork出子进程去持久化。Redis没有专门的载入RDB文件的命令,Redis服务器会在启动时,如果检测到了RDB文件就会自动载入RDB文件。

触发方式(自动触发和非自动触发)

(1)自动触发

在redis.conf 文件中,SNAPSHOTTING 的配置选项就是用来配置自动触发条件。

save: 用来配置RDB持久化触发的条件。save m n 表示 m 秒内,数据存在n次修改时,自动触发 bgsave (后台持久化)。

save “” 表示禁用快照;

save 900 1:表示900 秒内如果至少有 1 个 key 的值变化,则保存;

save 300 10:表示300 秒内如果至少有 10 个 key 的值变化,则保存;

save 60 10000:表示60 秒内如果至少有 10000 个 key 的值变化,则保存。

如果你只需要使用Redis的缓存功能,不需要持久化,只需要注释掉所有的save行即可。

stop-writes-on-bgsave-error: 默认值为 yes。如果RDB快照开启,并且最近的一次快照保存失败了,Redis会拒绝接收更新操作,以此来提醒用户数据持久化失败了,否则这些更新的数据可能会丢失。

rdbcompression:是否启用RDB快照文件压缩存储,默认是开启的,当数据量特别大时,压缩可以节省硬盘空间,但是会增加CPU消耗,可以选择关闭来节省CPU资源,建议开启。

rdbchecksum:文件校验,默认开启。在Redis 5.0版本后,新增了校验功能,用于保证文件的完整性。开启这个选项会增加10%左右的性能损耗,如果追求高性能,可以关闭该选项。

dbfilename :RDB文件名,默认为 dump.rdb

rdb-del-sync-files: Redis主从全量同步时,通过RDB文件传输实现。如果没有开启持久化,同步完成后,是否要移除主从同步的RDB文件,默认为no。

dir:存放RDB和AOF持久化文件的目录 默认为当前目录

(2)手动触发

Redis手动触发RDB持久化的命令有两种:

1)save :该命令会阻塞Redis主进程,在save持久化期间,Redis不能响应处理其他命令,这段时间Redis不可用,可能造成业务的停摆,直至RDB过程完成。一般不用。

2)bgsave:会在主进程fork出子进程进行RDB的持久化。阻塞只发生在fork阶段,而大key会导致fork时间增长。

2.3 RDB和AOF混用

RDB借鉴了aof_rewrite的思路,就是rbd文件写完,再把重写缓冲区的数据,追加到rbd文件的末尾,追加的这部分数据的格式是AOF的命令格式,这就是rdb_aof的混用。

2.4 三种持久化方式比较

三、什么是大key以及大key对持久化的影响

3.1 什么是大key

redis 是kv 中的v站用了大量的空间。比如当v的类型是hash、zset,并且里面存储了大量的元素,这个v对应的key就是大key。

3.2 fork进程写时复制原理

在Redis主进程中调用fork()函数,创建出子进程。这个子进程在fork()函数返回时,跟主进程的状态是一模一样的。包括mm_struct和页表。此时,他们的页表都被标记为私有的写时复制状态(只读状态)。当某个进程试图写某个数据页时,会触发写保护,内核会重新为该进程映射一段内存,供其读写,并将页表指向这个新的数据页。

3.3 面试题-大key对持久化有什么影响

结合不同的持久化方式回答。fsync压力大,fork时间长。

如果是AOF:always、every second、no aof_rewrite

如果是RDB: rdb_aof

fork是在主进程中执行的,如果fork慢,会影响到主进程的响应。

四、持久化源码分析

4.1 RDB持久化

4.1.1 RDB文件的创建

Redis是通过rdbSave函数来创建RDB文件的,SAVE 和 BGSAVE 会以不同的方式去调用rdbSave。

// src/rdb.c
/* Save the DB on disk. Return C_ERR on error, C_OK on success. */
int rdbSave(char *filename, rdbSaveInfo *rsi) {
    char tmpfile[256];
    char cwd[MAXPATHLEN]; /* Current working dir path for error messages. */
    FILE *fp = NULL;
    rio rdb;
    int error = 0;
    snprintf(tmpfile,256,"temp-%d.rdb", (int) getpid());
    fp = fopen(tmpfile,"w");
    if (!fp) {
        char *cwdp = getcwd(cwd,MAXPATHLEN);
        serverLog(LL_WARNING,
            "Failed opening the RDB file %s (in server root dir %s) "
            "for saving: %s",
            filename,
            cwdp ? cwdp : "unknown",
            strerror(errno));
        return C_ERR;
    }
    rioInitWithFile(&rdb,fp);
    startSaving(RDBFLAGS_NONE);
    if (server.rdb_save_incremental_fsync)
        rioSetAutoSync(&rdb,REDIS_AUTOSYNC_BYTES);
    if (rdbSaveRio(&rdb,&error,RDBFLAGS_NONE,rsi) == C_ERR) {
        errno = error;
        goto werr;
    }
    /* Make sure data will not remain on the OS's output buffers */
    if (fflush(fp)) goto werr;
    if (fsync(fileno(fp))) goto werr;
    if (fclose(fp)) { fp = NULL; goto werr; }
    fp = NULL;
    /* Use RENAME to make sure the DB file is changed atomically only
     * if the generate DB file is ok. */
    if (rename(tmpfile,filename) == -1) {
        char *cwdp = getcwd(cwd,MAXPATHLEN);
        serverLog(LL_WARNING,
            "Error moving temp DB file %s on the final "
            "destination %s (in server root dir %s): %s",
            tmpfile,
            filename,
            cwdp ? cwdp : "unknown",
            strerror(errno));
        unlink(tmpfile);
        stopSaving(0);
        return C_ERR;
    }
    serverLog(LL_NOTICE,"DB saved on disk");
    server.dirty = 0;
    server.lastsave = time(NULL);
    server.lastbgsave_status = C_OK;
    stopSaving(1);
    return C_OK;
werr:
    serverLog(LL_WARNING,"Write error saving DB on disk: %s", strerror(errno));
    if (fp) fclose(fp);
    unlink(tmpfile);
    stopSaving(0);
    return C_ERR;
}

SAVE命令,在Redis主线程中执行,如果save时间太长会影响Redis的性能。

void saveCommand(client *c) {
    // 如果已经有子进程在进行RDB持久化
    if (server.child_type == CHILD_TYPE_RDB) {
        addReplyError(c,"Background save already in progress");
        return;
    }
    rdbSaveInfo rsi, *rsiptr;
    rsiptr = rdbPopulateSaveInfo(&rsi);
    // 持久化
    if (rdbSave(server.rdb_filename,rsiptr) == C_OK) {
        addReply(c,shared.ok);
    } else {
        addReplyErrorObject(c,shared.err);
    }
}

BGSAVE命令是通过执行rdbSaveBackground函数,可以看到rdbSave的调用时在子进程中。在BGSAVE执行期间,客户端发送的SAVE命令会被拒绝,禁止SAVE和BGSAVE同时执行,主要时为了防止主进程和子进程同时执行rdbSave,产生竞争;同理,也不能同时执行两个BGSAVE,也会产生竞争条件。

/* BGSAVE [SCHEDULE] */
void bgsaveCommand(client *c) {
    int schedule = 0;
    /* The SCHEDULE option changes the behavior of BGSAVE when an AOF rewrite
     * is in progress. Instead of returning an error a BGSAVE gets scheduled. */
    if (c->argc > 1) {
        if (c->argc == 2 && !strcasecmp(c->argv[1]->ptr,"schedule")) {
            schedule = 1;
        } else {
            addReplyErrorObject(c,shared.syntaxerr);
            return;
        }
    }
    rdbSaveInfo rsi, *rsiptr;
    rsiptr = rdbPopulateSaveInfo(&rsi);
    if (server.child_type == CHILD_TYPE_RDB) {
        addReplyError(c,"Background save already in progress");
    } else if (hasActiveChildProcess()) {
        if (schedule) {
            server.rdb_bgsave_scheduled = 1;
            addReplyStatus(c,"Background saving scheduled");
        } else {
            addReplyError(c,
            "Another child process is active (AOF?): can't BGSAVE right now. "
            "Use BGSAVE SCHEDULE in order to schedule a BGSAVE whenever "
            "possible.");
        }
    } else if (rdbSaveBackground(server.rdb_filename,rsiptr) == C_OK) {
        addReplyStatus(c,"Background saving started");
    } else {
        addReplyErrorObject(c,shared.err);
    }
}
int rdbSaveBackground(char *filename, rdbSaveInfo *rsi) {
    pid_t childpid;
    if (hasActiveChildProcess()) return C_ERR;
    server.dirty_before_bgsave = server.dirty;
    server.lastbgsave_try = time(NULL);
	// 子进程
    if ((childpid = redisFork(CHILD_TYPE_RDB)) == 0) {
        int retval;
        /* Child */
        redisSetProcTitle("redis-rdb-bgsave");
        redisSetCpuAffinity(server.bgsave_cpulist);
        retval = rdbSave(filename,rsi);
        if (retval == C_OK) {
            sendChildCowInfo(CHILD_INFO_TYPE_RDB_COW_SIZE, "RDB");
        }
        exitFromChild((retval == C_OK) ? 0 : 1);
    } else {
        /* Parent */
        if (childpid == -1) {
            server.lastbgsave_status = C_ERR;
            serverLog(LL_WARNING,"Can't save in background: fork: %s",
                strerror(errno));
            return C_ERR;
        }
        serverLog(LL_NOTICE,"Background saving started by pid %ld",(long) childpid);
        server.rdb_save_time_start = time(NULL);
        server.rdb_child_type = RDB_CHILD_TYPE_DISK;
        return C_OK;
    }
    return C_OK; /* unreached */
}

4.1.2 RDB文件的载入

Redis通过rdbLoad函数完成RDB文件的载入工作。Redis服务器在RDB的载入过程中会一直阻塞,直到完成加载。

int rdbLoad(char *filename, rdbSaveInfo *rsi, int rdbflags) {
    FILE *fp;
    rio rdb;
    int retval;
    if ((fp = fopen(filename,"r")) == NULL) return C_ERR;
    startLoadingFile(fp, filename,rdbflags);
    rioInitWithFile(&rdb,fp);
    retval = rdbLoadRio(&rdb,rdbflags,rsi);
    fclose(fp);
    stopLoading(retval==C_OK);
    return retval;
}

4.2 AOF持久化

4.2.1 AOF持久化实现

4.2.2 源码分析

// src/server.h
/* Append only defines */
#define AOF_FSYNC_NO 0
#define AOF_FSYNC_ALWAYS 1
#define AOF_FSYNC_EVERYSEC 2
// src/aof.c
void flushAppendOnlyFile(int force) {
    ssize_t nwritten;
    int sync_in_progress = 0;
    mstime_t latency;
	// 如果当前aof_buf缓冲区为空
    if (sdslen(server.aof_buf) == 0) {
        /* Check if we need to do fsync even the aof buffer is empty,
         * because previously in AOF_FSYNC_EVERYSEC mode, fsync is
         * called only when aof buffer is not empty, so if users
         * stop write commands before fsync called in one second,
         * the data in page cache cannot be flushed in time. */
        if (server.aof_fsync == AOF_FSYNC_EVERYSEC &&
            server.aof_fsync_offset != server.aof_current_size &&
            server.unixtime > server.aof_last_fsync &&
            !(sync_in_progress = aofFsyncInProgress())) {
            goto try_fsync;
        } else {
            return;
        }
    }
    if (server.aof_fsync == AOF_FSYNC_EVERYSEC)
        sync_in_progress = aofFsyncInProgress();
    if (server.aof_fsync == AOF_FSYNC_EVERYSEC && !force) {
        /* With this append fsync policy we do background fsyncing.
         * If the fsync is still in progress we can try to delay
         * the write for a couple of seconds. */
        if (sync_in_progress) {
            if (server.aof_flush_postponed_start == 0) {
                /* No previous write postponing, remember that we are
                 * postponing the flush and return. */
                server.aof_flush_postponed_start = server.unixtime;
                return;
            } else if (server.unixtime - server.aof_flush_postponed_start < 2) {
                /* We were already waiting for fsync to finish, but for less
                 * than two seconds this is still ok. Postpone again. */
                return;
            }
            /* Otherwise fall trough, and go write since we can't wait
             * over two seconds. */
            server.aof_delayed_fsync++;
            serverLog(LL_NOTICE,"Asynchronous AOF fsync is taking too long (disk is busy?). Writing the AOF buffer without waiting for fsync to complete, this may slow down Redis.");
        }
    }
    /* We want to perform a single write. This should be guaranteed atomic
     * at least if the filesystem we are writing is a real physical one.
     * While this will save us against the server being killed I don't think
     * there is much to do about the whole server stopping for power problems
     * or alike */
    if (server.aof_flush_sleep && sdslen(server.aof_buf)) {
        usleep(server.aof_flush_sleep);
    }
    latencyStartMonitor(latency);
    nwritten = aofWrite(server.aof_fd,server.aof_buf,sdslen(server.aof_buf));
    latencyEndMonitor(latency);
    /* We want to capture different events for delayed writes:
     * when the delay happens with a pending fsync, or with a saving child
     * active, and when the above two conditions are missing.
     * We also use an additional event name to save all samples which is
     * useful for graphing / monitoring purposes. */
    if (sync_in_progress) {
        latencyAddSampleIfNeeded("aof-write-pending-fsync",latency);
    } else if (hasActiveChildProcess()) {
        latencyAddSampleIfNeeded("aof-write-active-child",latency);
    } else {
        latencyAddSampleIfNeeded("aof-write-alone",latency);
    }
    latencyAddSampleIfNeeded("aof-write",latency);
    /* We performed the write so reset the postponed flush sentinel to zero. */
    server.aof_flush_postponed_start = 0;
    if (nwritten != (ssize_t)sdslen(server.aof_buf)) {
        static time_t last_write_error_log = 0;
        int can_log = 0;
        /* Limit logging rate to 1 line per AOF_WRITE_LOG_ERROR_RATE seconds. */
        if ((server.unixtime - last_write_error_log) > AOF_WRITE_LOG_ERROR_RATE) {
            can_log = 1;
            last_write_error_log = server.unixtime;
        }
        /* Log the AOF write error and record the error code. */
        if (nwritten == -1) {
            if (can_log) {
                serverLog(LL_WARNING,"Error writing to the AOF file: %s",
                    strerror(errno));
                server.aof_last_write_errno = errno;
            }
        } else {
            if (can_log) {
                serverLog(LL_WARNING,"Short write while writing to "
                                       "the AOF file: (nwritten=%lld, "
                                       "expected=%lld)",
                                       (long long)nwritten,
                                       (long long)sdslen(server.aof_buf));
            }
            if (ftruncate(server.aof_fd, server.aof_current_size) == -1) {
                if (can_log) {
                    serverLog(LL_WARNING, "Could not remove short write "
                             "from the append-only file.  Redis may refuse "
                             "to load the AOF the next time it starts.  "
                             "ftruncate: %s", strerror(errno));
                }
            } else {
                /* If the ftruncate() succeeded we can set nwritten to
                 * -1 since there is no longer partial data into the AOF. */
                nwritten = -1;
            }
            server.aof_last_write_errno = ENOSPC;
        }
        /* Handle the AOF write error. */
        if (server.aof_fsync == AOF_FSYNC_ALWAYS) {
            /* We can't recover when the fsync policy is ALWAYS since the reply
             * for the client is already in the output buffers (both writes and
             * reads), and the changes to the db can't be rolled back. Since we
             * have a contract with the user that on acknowledged or observed
             * writes are is synced on disk, we must exit. */
            serverLog(LL_WARNING,"Can't recover from AOF write error when the AOF fsync policy is 'always'. Exiting...");
            exit(1);
        } else {
            /* Recover from failed write leaving data into the buffer. However
             * set an error to stop accepting writes as long as the error
             * condition is not cleared. */
            server.aof_last_write_status = C_ERR;
            /* Trim the sds buffer if there was a partial write, and there
             * was no way to undo it with ftruncate(2). */
            if (nwritten > 0) {
                server.aof_current_size += nwritten;
                sdsrange(server.aof_buf,nwritten,-1);
            }
            return; /* We'll try again on the next call... */
        }
    } else {
        /* Successful write(2). If AOF was in error state, restore the
         * OK state and log the event. */
        if (server.aof_last_write_status == C_ERR) {
            serverLog(LL_WARNING,
                "AOF write error looks solved, Redis can write again.");
            server.aof_last_write_status = C_OK;
        }
    }
    server.aof_current_size += nwritten;
    /* Re-use AOF buffer when it is small enough. The maximum comes from the
     * arena size of 4k minus some overhead (but is otherwise arbitrary). */
    if ((sdslen(server.aof_buf)+sdsavail(server.aof_buf)) < 4000) {
        sdsclear(server.aof_buf);
    } else {
        sdsfree(server.aof_buf);
        server.aof_buf = sdsempty();
    }
try_fsync:
    /* Don't fsync if no-appendfsync-on-rewrite is set to yes and there are
     * children doing I/O in the background. */
    if (server.aof_no_fsync_on_rewrite && hasActiveChildProcess())
        return;
    /* Perform the fsync if needed. */
    if (server.aof_fsync == AOF_FSYNC_ALWAYS) {
        /* redis_fsync is defined as fdatasync() for Linux in order to avoid
         * flushing metadata. */
        latencyStartMonitor(latency);
        /* Let's try to get this data on the disk. To guarantee data safe when
         * the AOF fsync policy is 'always', we should exit if failed to fsync
         * AOF (see comment next to the exit(1) after write error above). */
        if (redis_fsync(server.aof_fd) == -1) {
            serverLog(LL_WARNING,"Can't persist AOF for fsync error when the "
              "AOF fsync policy is 'always': %s. Exiting...", strerror(errno));
            exit(1);
        }
        latencyEndMonitor(latency);
        latencyAddSampleIfNeeded("aof-fsync-always",latency);
        server.aof_fsync_offset = server.aof_current_size;
        server.aof_last_fsync = server.unixtime;
    } else if ((server.aof_fsync == AOF_FSYNC_EVERYSEC &&
                server.unixtime > server.aof_last_fsync)) {
        if (!sync_in_progress) {
            aof_background_fsync(server.aof_fd);
            server.aof_fsync_offset = server.aof_current_size;
        }
        server.aof_last_fsync = server.unixtime;
    }
}

加载全部内容

相关教程
猜你喜欢
用户评论